carlotpilot

1 minute ago, mattb73lt said:

BTW, if you're just looking for the controller on the wipers? I found it on Amazon for about $60 less than other suppliers.

I will check them out

2 minutes ago, mattb73lt said:

It is old, probably 1920's, but still accurate.

I have a drill press similar driven about the same age

old school lathe for sure 

really good thinking on the wiper solution` you may have found the answer for me to my problem with the controller set up . bad (gem) in a ford 450` ford wants 800+ for a replacement ` less than 200 for one of those

beautiful  little animal

4 minutes ago, Joey Mack said:

ok. i thought about getting some anyway

it may or may not help but it won`t hurt you either

4 minutes ago, Joey Mack said:

A rotation of Advil and Tylenol according to the bottle, and Dexamethason, twice a day. Stay hydrated, and as active as possible, thats been tough... and yes, tough it out... it's been rough this week so far, my mornings are hell.... im on day 8. I have been documenting my progress, regular temp checks and Pulse Ox and Beats per min.  I have been as  hot as 101.2 and as low as 96.1... Jojo

ask who ever is treating you about adding some zinc 

7 minutes ago, Joey Mack said:

Well another thought about the China virus... So as some know I am home sick with it. I have had some really bad days this week. My wife is lucky enough to work for a company that is paying here to stay home with me and get paid as well.. We are greatful, however, They are focusing so much on who is worthy of the vaccine, whether or not my wife takes it, she has not been offered an emercency dose because I am a carrier and I'm sick.... So what happens if she carries it to work in her system???  I dont know what else think... Just on my mind.. Jojo

I have to ask`what are you being treated with  anything or just being told to tough it out?

5 minutes ago, tjc transport said:

although i came very close to buying one of these:

 

 

marjorie green was wearing one of those as she gave a tour of the fence today

3 hours ago, Rob said:

First trip to near full extension. Quite windy so didn't want to go the last 12' or so.

The peak of my building is almost 28' from the ground for reference.

Very smooth and linear operation from either the ground station, or the basket after rewinding all six proportional control coils. I'm happy but now need to "gut" the original wiring harness(s) out of it and replace with new wire before something burns down. Everything electrical works, but a lot of insulation has been compromised or missing from exposure to the elements.

rob  I could probably get you the job of doing another 80' the same as you`re doing to that one - interested ?

7 hours ago, mowerman said:

Actually middle 80s they were pretty rough... bob

about that time good ole banning was THE training site for caldot

On 2/22/2021 at 6:57 AM, RowdyRebel said:

Pair of singles. Worst part was the farm hand (with the side-by-side) trying to "help"...told him several times "I got this...just stay back and let me do my job." It'd work for about 5 seconds before he'd be right back in there grabbing & tugging on the chains as I was trying to get them on the tires. Took 10 times as long as it should have.

don`t ya just love it when someone who does`nt have a clue insists on helping 

one must dig far deeper than the talking heads on any boob tube channel to find out whats going on

18 hours ago, GA_Dave said:

I found this pic of Biden supporters......

pretty well says it all

might be a good idea to capture that whole axle . not many left with budd hubs

well just damn. good luck with it

1 hour ago, storkmack said:

Hope this pic helps.   Dailydieseldose has a good write up on the Center Point  steering system.

butler truck parts  in pa. may have what you are looking for there were several older int. mixers & dumps out in back last time i was by there . thats been 8 or more mths. ago . might be worth a call

4 minutes ago, Hayseed said:

The fella, or his Shoes..??

shoes remained

plus fet

1 hour ago, Rob said:

Can't hardly beat that into some people; till they live the dream themselves.

the kw dealer near me has a 7 axle realllly nice looking dump on the lot $ 214.000 range  ----- unreal

even Brand new its a crap shoot  and the payments don`t stop

(8) . 11x24.5 steel dayton rims  in good cond 45.00 each

3 hours ago, BMT Forum Bot said:

The electric-vehicle battery takes only five minutes to charge and could boost the appeal of EVs to drivers skeptical about range and charging times.

View the full article

heres another laughable claim

5 hours ago, GA_Dave said:

In honor of inauguration day.....

and even they did`nt attend