firenut
-
Posts
124 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by firenut
-
I am getting good fuel... I think... i set up a temp system where the fuel tank was and have good fuel to the pump and the carb... it sounds like it wants to start but doesn't successfully fire..
-
Just finished reassembling my 707A gas engine after a rebuild. Trying to start it, and i can hear it "sputter" or "hiss" and try to start but no joy... it did back fire once... any ideas??
-
L Model Clutch and Pedal
firenut replied to firenut's topic in Antique and Classic Mack Trucks General Discussion
Yes. and i cant get it to work... Thanks for any help you can provide... -
L Model Clutch and Pedal
firenut replied to firenut's topic in Antique and Classic Mack Trucks General Discussion
Unfortunately there is not. The part I am lost on is attaching the arm to the sprocket on the outside of the transmission and "how" to do that. At one time I saw that someone posted the instructions on BMT but I can no longer find it. -
Looking for some advice. I just placed the engine and transmission back into the chassis of my L Model Mack Fire Engine. After placement i placed the clutch arm/bracket and I do not know how to set it. It seems like it is not releasing in far enough when I push the pedal. Any advice is appreciated.
-
Hello All! Looking for some help. I just had my 707 engine rebuilt and need to install the fuel pump push rod. It has a notch in it and I am not sure which direction to insert it. Any assistance is appreciated. This is also cross posted in the Antiques Section..
-
Hello All! Looking for some help. I just had my 707 engine rebuilt and need to install the fuel pump push rod. It has a notch in it and I am not sure which direction to insert it. Any assistance is appreciated. This is also cross posted in the engines section.
-
Can anyone tell me if this is a problem? Should I braze all but the two "original" holes shut or will it cause NO problems having multiple. Already have to braze the milled surfaces to line up the two manifolds... this is the "top" of exhaust.. TIA. **BTW 1950 Mack 85LS**
-
Hello all! I have a CF Fire Truck and recently had the steering wheel restored. I put the wheel back on and all worked however now sporadically when I engage the turn signal the horn sounds... it does have a center horn button and that works fine... Same thing also happens when the flashers are engaged... Any advice is appreciated!!
-
Heres a snapshot! Thanks for the assistance!!
-
Can anyone tell me what the "cutout" on the bottom of an F model steering wheel is for? It is cut from where the sprocket would be attached to the shaft. Thanks in advance
-
Can anyone tell me what the notch is for on the underside of a CF steering wheel? Seems like a cutout and notch on the wheel itself around the internal teeth. Is there a specific way the wheel must go back on??
-
Looking for a good steering wheel restoration company for my CF Steering Wheel. Any of you folks have a reference? TIA
-
Thanks.. that's who I am trying to find.. but so far no luck...
-
Thanks. I own the 1973 CF Aerialscope originally from Rockville Maryland.
-
They had strobes mounted to the nose which were not original..
-
Looking for the nose aluminium for a CF like the image below... anyone have a source?
-
Hi everyone. Looking for a picture of a data plate from a CF700 aerialscope. I am told it was located on the drivers door. Thanks in advance. Mine is missing, and I want to buy the correct one..
-
Looking for instruction as to how beacon ray's (x2) were installed on the roof of a CF. I think i know where the holes are but have no clue how the light was installed. Thanks in advance..
-
I recently purchased a CF aerialscope.. can anyone tell me where the data plates should be? i think they are missing.. thanks
-
yeah, I'm looking for the ex Rockville truck, was last at Bristol Twp. I think... the one in the pic is the correct rig..
-
Hello All, I am looking for a 1973 CF700 Tower Ladder. I understand that Mack MEH9 may own it, but cannot get in touch with him (tried pm'ing and calling..) it is the ex Bristol Township PA, ladder.. any assistance is appreciated. thanks..
-
Fxfymn... Did you get a specific one?? There are many variants to the 1575...
-
Anyone know how i convert the Mack part number for an 85LS pumper, master cylinder??the casting number is FE-1575 but there are lots of variations to that casting.. not looking to send to white post, as the original is too far gone... found them online but dont know which one... the mack number is 8QE44.. thanks in advance..
-
I am looking for examples of horn buttons for my 50 LS85.. I have seen a few different ones but to sure which applies to my unit.. any help is appreciated..
BMT Forum Logo
