-
Posts
93 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by markpwhit
-
-
My B42 gas job has a 815 rear end and it is screaming at 45 mph. Slow is not the word .
- 1
-
Listing for friend - 1964 B30 rolling chassis. Very solid. Photos on Cleveland craigslist.
$500.00 obo
Please text all inquiries to 440-567-3399
-
Listing for friend - Mid 70's DM Hood. Very solid and in good condition. Please text all inquiries. 440-567-3399
$500.00 obo
Located east of Cleveland Ohio
Photos posted on Cleveland craigslist
-
Need help to confirm. Need to replace fuel pump on a B model that is 12 volt positive ground. Existing pump is a new modern version that is about 10 years old. When wiring a replacement, does it need to be wired in reverse polarity - meaning the hot wire from the pump needs to be grounded and the ground wire from pump is wired to the hot off the truck. Thanks in advance.
-
Looking for some feedback for an 09 Granite tri-axle dump I am looking at. Dealer states that the frame is a "thick frame"? Anybody familiar with this terminology. Ideally I am looking for a double frame at the least - and was wondering if a thick frame is considered a double frame nowadays?
Any advice/input would be greatly appreciated. thanks in advance.
-
Looking at an 09 Granite tri-axle dump and it has a 415 HP MP8 motor. Looking on feedback on how reliable/problem free these motors are. Mileage is listed at around 150K.
Any experiences/feedback would be greatly appreciated. Just trying to avoid buying something that will full of headaches.
Thanks - Mark
-
Looking at an 07 Granite CV713 with the A1 400 motor. Question is on a scale of 1-10 (10 being the best) - how dependable/reliable is this motor. Are there any major issues with them?
Any insight would be greatly appreciated. Thanks in advance.
-
Thanks to all for the responses.
Mark
-
Having a problem with my rear marker lamps that are mounted on the back of the dump bed. Seems as though I replace them and they only last about two weeks before they go out again.
Using standard type bulbs - but was wondering if LED lights hold up better to vibration. I think they are blowing out due to the slamming of the tailgate. Anybody else have a situation like this.
Don't believe it is a wiring issue as the other marker lamps at the front of the bed continue to work - and they are all fed off the same power source.
Any help would be appreciated.
-
Man......................Fed-Ex almost lost two trucks that day. Dam lucky the first driver to cross wasn't taken out.
- 1
-
- Popular Post
- Popular Post
-
Agree on the crane rating. 105 tons is a pretty good size crane especially for a knuckle boom. Guessing more like 25 tons.
-
1973 U795-1043
Yes - this is the one thas has been talked about on the BMT a zillion times.
Recently priced at $5,000.00 - but have reduced it to $4,000.00. Reasonable offers would be considered.
For additional information and photos - please refer to Cleveland Craiglist/Heavy Equipment.
Please text all inquiries to 440-567-3399
Mark
-
Thanks Paul.
-
My neighbor has one for a DM600. Not sure what year it is - or confirm if it will fit.
-
Thanks for the verification. Couldn't find any true ID numbers on it.
-
-
- Popular Post
- Popular Post
-
My B-30 wouldn't rise over 180 in the summer going to Macungie.
Guys...........thanks for the response. My temperature gauge currently isn't working - and I would like to avoid any issues this summer.
Is it difficult to install a new one? Would just to replace the existing with a new. No known issues at this point.
-
Looking for some help. Would anybody know the normal operating temperature range that a flat head 6 cylinder EN402 (Gas) should safely run at?
Thanks in advance.
Mark
-
1973 U795-1043
Yes - this is the one thas has been talked about on the BMT a zillion times.
Recently priced at $5,000.00 - but I will consider reasonable offers as it needs to go for
other Mack projects.
For additional information and photos - please refer to Cleveland Craiglist/Heavy Equipment.
Please text all inquiries to 440-567-3399
Mark
-
Would anybody know the estimated weight of a 1956 B42 tandem axle with a EN402 Gas Motor? Has a roughly 16'0" steel frame/wood bed on it with headboard.
Looking to purchase a trailer to haul it - and need a rough estimate on an adequate size.
Thanks in advance.
Mark
-
I have a 1973 U795 for sale. Pretty decent shape for its age, and runs quite well.
-
Where is the truck located at? Might have some interest in it.
1962 B-42
in Antique and Classic Mack Trucks General Discussion
Posted
Has a 10 speed duplex. Couldn't imagine driving a quad box.