Jump to content

Recommended Posts

2021 mp8. The truck came to us for not completing a regen. Using tech tool I start the regen but it never commands the hi to start dosing. Engine idles up, exhaust temps look good in the 550's and I can see the ahi module go thru it's checks.. Then it just sits there. Never starts dosing. 

Before it came to us it had new injectors, turbo, manifold, and the entire 1 box is new.. 

I'm getting, or maybe I already am.. Stumped! 

Link to comment
https://www.bigmacktrucks.com/topic/76085-strange-regen-problem/
Share on other sites

1 hour ago, steeler said:

2021 mp8. The truck came to us for not completing a regen. Using tech tool I start the regen but it never commands the hi to start dosing. Engine idles up, exhaust temps look good in the 550's and I can see the ahi module go thru it's checks.. Then it just sits there. Never starts dosing. 

Before it came to us it had new injectors, turbo, manifold, and the entire 1 box is new.. 

I'm getting, or maybe I already am.. Stumped! 

I wonder if the previous part putteroners did relearn data resets ! just thouing that out there!

  • Like 1
2 hours ago, fjh said:

I wonder if the previous part putteroners did relearn data resets ! just thouing that out there!

Yeah that was my first thought. I reset everything with no luck. Swapped ecu with a different truck, still nothing. Getting ready to swap acm and try that! 

I’m not very familiar with these and getting more distanced I’m fortunate to be retired from this up and coming mess!just throwing stuff up I had heard around the shop! Also was there not a check valve down stream that was troublesome?

What does the AHI nozzle/7th injector look like? I had several times in the past where a truck would NOT regen or even give an error code/MIL, but swapping the AHI nozzle fixed it. They tend to get clogged pretty bad, to the point Volvo redesigned them to have a shield to slow the soot buildup down. 

44 minutes ago, The Heinz said:

Was an OEM AHI module installed? We haven't had good luck with aftermarket ones. Other than that, I'm not sure, don't want to be the parts cannon! Even though I AM the parts cannon lol. 

I'm happy to see you are not a parts cannon supporter my self! I wonder if maybe  the turbo is is not sticking! if it can't go full stroke it maybe seeing there is not enough air to function correctly! ??maybe pull the servo and check the sweep and lever for being sticky!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...