Old_Red Posted December 11, 2005 Share Posted December 11, 2005 How much and how easy are U model door locks to be put in? And Barry do you guys have any MACK mudflaps in ? Quote Link to comment Share on other sites More sharing options...
woberlin Posted December 11, 2005 Share Posted December 11, 2005 They come as a set, 2 doors, and the ignition, and were still available from Mack as of last fall when I got a set. I thought the price was great, I think less than $30 for the set. As far as installation, it's about a 10 minute job, and does'nt require taking the door apart. A compression clip holds the lock in against the door skin. Pull it out, the lock assy will slide out, put in the new lock and reinstall the clip. My truck is a 68, but I believe they used the same setup for alot of years. Good luck. Quote Link to comment Share on other sites More sharing options...
Old_Red Posted December 11, 2005 Author Share Posted December 11, 2005 How can I get a owners manual for a U model? Quote Link to comment Share on other sites More sharing options...
rick harper Posted December 12, 2005 Share Posted December 12, 2005 tell barry to sell you a 34RC1106 key/lock tumbler set and two(2) new clips 48RU1267. also, you might want to change the tumber in the ignition so one(1) key fits the door and ignition and that tumbler is also supplied in the kit. Quote Link to comment Share on other sites More sharing options...
Old_Red Posted December 12, 2005 Author Share Posted December 12, 2005 Say thanks alot , for helping me with my door problems. One last one , does anyone have a B or a L model with a single axle thats road ready they want to get rid of. I have looked on truck paper for the last month or so and same with truck trader and old macks.com and i still cant find one. Im looking for a tractor Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.