Jump to content

2000 ch613 running, turn, back up work no brake lights

Recommended Posts

I have replace the manifold under dash because I thought it might be that it was leaking really bad. Checked all sensors with Ohm metter get all 0.000 with no pressure to them. I did notice the turn signal is a bit loose and slow to respond with you use it does that have anything to do with the brake lights? Also the hook up light comes on which is on the same circuit as brakes ( I believe)

Brake lights are on with low air buzzer and low air light.

Brake lights go off when 90 psi is reached

Turn signals work

Hazards work

Back up light works

Running lights work

Are the sensors under the dash open or normally closed? Any ideas before I pay 100hr to a shop?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...