MadDog Salvaje

I have replace the manifold under dash because I thought it might be that it was leaking really bad. Checked all sensors with Ohm metter get all 0.000 with no pressure to them. I did notice the turn signal is a bit loose and slow to respond with you use it does that have anything to do with the brake lights? Also the hook up light comes on which is on the same circuit as brakes ( I believe) Brake lights are on with low air buzzer and low air light. Brake lights go off when 90 psi is reached Turn signals work Hazards work Back up light works Running lights work Are the sensors under the dash open or normally closed? Any ideas before I pay 100hr to a shop?

Seeing how you guys are talking about the cam and Hrings I have a push rod that does not spin it seems to fall into a pit when I try to spin it and only spins half way and stops. Its causing the bridge on the valves to jump off. Does this sound like the roller, H ring, or Cam? Trying to see if this is a sign of either one. Am I removing head or just cam.

I changed the oil and didnt notice any metal chunks if the roller or clip jammed up Im not sure how much metal it would make. Im not saying there lying if they tore the motor apart to see the cam and said it was bad but wasn't that would be lying they are just giving my the worst news when Im sure it can be other things going on.

Its the bridge on the intake valves that jumps off and spins side ways. A shop told me its the cam but and to bring it down but before I pay to have a cam get replaced that might not need it thought Id see if anyone else has had this problem and what the fix was.

I have a rocker arm jumping sideways off the intake valve. The truck was missing and number 6 cylinder was not working so I removed valve cover and noticed the rocker arm spun side ways. I adjusted the valves put everything back and truck idle was perfect drove it let it idle turned it off and the next time we went to start it ruff idle again. If cam roller how do I check If rocker arm is the problem what do I look for. Any info would be appreciated An if anyone has a video on the cam for this pass it along 2000 Ch613 E7350