Rising Sun Posted July 16, 2017 Share Posted July 16, 2017 I am a new owner of a 1998 RD688S and I just recently encountered some problems and I am seeking help. 1. Just had the #1 plunger replaced because there was no fuel going through that fuel line and once I had that done, I am now seeing white smoke out of my stack, and the turbo is leaking. Can someone offer me some suggestions 2. Also, I just added a gallon of oil and my oil pressure gauge is at 55psi. Do I need to let it warm up to get back to normal? Quote Link to comment Share on other sites More sharing options...
hatcity Posted July 16, 2017 Share Posted July 16, 2017 Item#2-is that at cold startup? normal get hot and see...around 20 hot idle is ok hot running at 1600 rpm is about 45 for me-shop says good Quote Success is only a stones throw away.................................................................for a Palestinian Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.