Liquidlawn Posted July 1, 2016 Share Posted July 1, 2016 Hi I have a 2005 cv713. My fuel gauge has been erratic recently. Yesterday, all my gauges quit working. I checked the fuse in the cab fuse panel. Fuse was good. I checked power to the ribbon cable on the back of the gauge panel. I have power to the upper left and lower right positions only. Am I missing a fuse position? I replaced the gauge panel (white) last year do to numerous lights being out for the gauges. please help thanks Bruce Quote Link to comment Share on other sites More sharing options...
tjc transport Posted July 2, 2016 Share Posted July 2, 2016 when mine went out it was a bad ground wire in the ribbon cable. Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment Share on other sites More sharing options...
Liquidlawn Posted July 2, 2016 Author Share Posted July 2, 2016 Thanks, I will check it. Appreciate the advise Quote Link to comment Share on other sites More sharing options...
tjc transport Posted July 2, 2016 Share Posted July 2, 2016 i ended up replacing the ground with a wire bolted from the dash frame to a wire i soldered on the printed circuit board. it had something to do with where the ribbon wire plug went into the cluster. 1 Quote when you are up to your armpits in alligators, it is hard to remember you only came in to drain the swamp.. Link to comment Share on other sites More sharing options...
06fastboy2 Posted August 13, 2016 Share Posted August 13, 2016 I have a 07 CL733 that has the dash panel problem where the gauges go off and seat belt light comes on and the buzzer goes off.I have the sevice bulletin for pre 02 models for the fix of this problem.My question is does anyone no if this servise bulletin pertains to the 07 models. Quote Link to comment Share on other sites More sharing options...
Jlohrtrucking Posted March 11, 2017 Share Posted March 11, 2017 I have a 2001 cxn613. The ribbon to my cluster was bad connection. Splitting apart mail pins in cluster made tight connection and has been trouble free the last few years. Quote Link to comment Share on other sites More sharing options...
Mohame12 Posted November 5, 2021 Share Posted November 5, 2021 On 10/22/2021 at 6:58 PM, Joey Mack said: did you call any Mack dealer with the last 6 of the v.i.n. and just get it that way??? I find the part number from Mack dealer part# 64MT2103 Quote Link to comment Share on other sites More sharing options...
Mohame12 Posted November 5, 2021 Share Posted November 5, 2021 My 2007 Mack vision CXN the RPM and MPH sign it’s not working, the dashboard it’s dark need help the truck star run no issue the dashboard it’s dark. water,fuel,oil sign it’s working fine, the rpm mph not working I need help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.