Jimmy Carwile Posted March 5, 2014 Share Posted March 5, 2014 (edited) shut truck off last nt was running fine now no power to injc pump any ideas checked all fuses and breakers could it be ijection ecm gone bad any help greatly epreciated thank s guy s 95 ch613 e7 350 v mac iii Edited March 5, 2014 by jimmy carwile Quote Link to comment Share on other sites More sharing options...
Jimmy Carwile Posted March 5, 2014 Author Share Posted March 5, 2014 ou 95 ch 613 e7 350 v mac 4 system Quote Link to comment Share on other sites More sharing options...
turckster Posted March 7, 2014 Share Posted March 7, 2014 The inj. pump harness connector could be at fault, Check the terminals for signs of corrosion or overheating from poor connection. Have someone crank the engine while you wiggle the connector to see if the engine tries to start. if that's the case, clean the terminals w/electrical contact cleaner. Secure the connector to the holder using zip ties, keep the harness movement to a minimum. Good luck Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.