M54A1 Posted July 9, 2007 Share Posted July 9, 2007 I have a chance to buy a B613 Mack. It is a single axle, double framed, tractor with a duplex, It has a low mile 237 that was new when installed by a mack dealer, they also installed front brakes. The truck runs and drives good but has some rust on the cowl by the wind shield and at the edges of the floor board and some rust on the door skin. Everything works in the truck but the wiring could stand to be cleaned up, is $6500 a decent price. Quote Link to comment Share on other sites More sharing options...
Barry Posted July 9, 2007 Share Posted July 9, 2007 I have a chance to buy a B613 Mack. It is a single axle, double framed, tractor with a duplex, It has a low mile 237 that was new when installed by a mack dealer, they also installed front brakes. The truck runs and drives good but has some rust on the cowl by the wind shield and at the edges of the floor board and some rust on the door skin. Everything works in the truck but the wiring could stand to be cleaned up, is $6500 a decent price.Sounds decent, I'd try to get it down to $5000, but still worth it. The 237 is an added bonus...still lots of parts available for it as opposed to the 673's Quote Barry - Watt's Truck Center Parts Manager and BMT Webmaster...1-888-304-MACK Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.