Moose 0 Posted February 14, 2007 I had valve problems with my end673, When l took off the rear rocker cover l discovered that no oil was getting to them. I took off rocker shaft----allclear. Took head off---oil passage clear. ran wire down oil passage to #5 cam bearing---allclear. Turned engine over with starter and front passage plugged--no oil. One old mechanic advisor says "cam bearing spun" another says "oil tube leaking or disconnected" Do not want to spend a lot of time going in the wrong direction. Any one have this problem before? Any other ideas? Moose --------thanks! Quote Share this post Link to post Share on other sites
