Jump to content

E6 Valve Setting


Stingray698
 Share

Recommended Posts

I have a older mack with a 4v engine going to set valves on it , i have 3 or 4 older mack manuals in every one it shows the exhaust rocker for jake and non jake engines requires a special tool with a 1-1/8 socket and big flat blade inside it , where do you get that tool or is there an alternative tool?? or way?? Thanks

Link to comment
Share on other sites

I have a older mack with a 4v engine going to set valves on it , i have 3 or 4 older mack manuals in every one it shows the exhaust rocker for jake and non jake engines requires a special tool with a 1-1/8 socket and big flat blade inside it , where do you get that tool or is there an alternative tool?? or way?? Thanks

Simply use a 1 1/8 boxed end wrench and a screw driver OR your thumb to push and turn till snug on a 24 thou feeler and retighten and recheck after tight!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...