jakesbrakes Posted August 5, 2009 Share Posted August 5, 2009 Hello. I have an 81 r model tandem dump that needs an engine and I found a Em6 250 for a song! Were these good engines? Also would a dynatard swap from a junk Em6 300?Truck would be used for hauling rock for gas field service? Thanks for any input.Jakes Quote Link to comment Share on other sites More sharing options...
Lmackattack Posted August 5, 2009 Share Posted August 5, 2009 Personaly i think the 250 is weak. I can feel the diffrence in HP between a 250 and 300 and if its a low RPM 250 motor its even worse!it will do the job but I dont think you would like the change in HP... Find out if your 300 pump will fit the 250 and just have it timed and swap some parts to get it up to a 300HP Quote Link to comment Share on other sites More sharing options...
jakesbrakes Posted August 5, 2009 Author Share Posted August 5, 2009 Personaly i think the 250 is weak. I can feel the diffrence in HP between a 250 and 300 and if its a low RPM 250 motor its even worse!it will do the job but I dont think you would like the change in HP... Find out if your 300 pump will fit the 250 and just have it timed and swap some parts to get it up to a 300HPThanks for the advice Lmackattack. I've never driven a 250 E6 and did know what to expect. I'll check with mack and see if the components will swap to get a 300 out of this block. Thanks again Quote Link to comment Share on other sites More sharing options...
m5040 Posted September 22, 2009 Share Posted September 22, 2009 I have a EM6-275 and had the oil pan off. It did not come with the main bearing steel "bridges" like the 300 has. I installed a set since I had the pan off. This makes me think there is more to the 300 then just the pump/injectors. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.