Norway

These were 425's I think. Don't have the truck any more so I can't look for you. I traded up to a triaxle. This is a '93, RD690S with 20's and 50's, 300hp with fuller 8LL. She was a nice ride.

Rob

My non steer, single wheel, 20K tag takes 58PSI for 15K down which is what I use and if you wanted to go to 20K you'd inflate to 78PSI.

We run 77,000 loaded, with over weight permit, My set up is 18F / 20Tag / 44R

http://www.watsonsuspensions.com/docs/documents/Pressure%20Charts/AL2200%20Pressure%20Chart.pdf

Rob

I was getting ready to do a complete fluid change on my "new to me" Granite with the AI 375.

My dealer told me to clean the breather screen in the small housing front, passenger side of engine by water pump.

I'm dumping my anti freeze as the color is nasty. Picked up the in line filter for the antifreeze the goes in the radiator hose by the alternator.

My question is: Are there any other "hidden" things to look at, clean or check while doing the diesel, oil and antifreeze ?

I'm glad to have found this forum, Regards Rob.