FIREMAN

Looking for a 5 or 6 speed to go behind a 300.  maybe even a 7 speed.  

Thanks

That's a good start

Anyone know where I can find a Wiring diagram?  It's a 1986 RD688s

Thanks in advance

I have a 07 chn-613 with an AC-460.  It has 670,000 miles on it.  Blink code 49 comes on when I'm just cruising along and goes away if you mash the gas or let it just coast.  In December, I took it to dealer and they said EGR cooler was clogged.  Long story short cooler was only two years old and now the blink code comes on more often now after being replaced.  The truck doesn't run any differently and fuel mileage hasn't changed.  I'm looking for suggestions of what it is.  They said the reason for the code was because the mass flow tube reads egr temps and if there is a big discrepancy in temps it sends the code.  Apparently acceleration and deceleration causes the temps to get closer to specs.  Is this a really big deal?

Thinking of putting a tuner on my 2007 AC-460.  Looking for better fuel mileage not so much more horsepower.I took the muffler off and put in a hi flow air filter and that takes it up to about 5.9 MPG. 

I pull a tank and have pump off time just about everyday.  Before I made the changes I could only get about 5.0 to 5.1 MPG out of it.

I don't want more fuel economy at the risk of shortening the life of the engine itself.

Any ideas on what is out there as far as a tuner goes.  I have been talking to a guy about a "Steinbauer"   any opinions? 

Hey Mike

Looking to get a Superliner for the next project.  Hopefully I can do one that we take all the way down to the last bolt and then go back together.

The main thing I'm looking for is that I find one with a good solid cab.  I would like it to have air ride too but I'm pretty flexible on that.

Was wondering if anybody knows if a guy can buy a replacement wiring harness for a early nineties R Model?

Congrats Mike. nice seeing you again

Like the look without the wing Mikey has his Rawhide looking good too.

Hey Gambi

I don't think it was me. I haven't been on I-39 for a year or two.

Larry

Thanks Trent

I was looking for you on Friday. I saw your R-Model park there. Did you get in there on Thursday or Friday?

!st for graphics

1st for OEM interior

3rd in our class 2007 to 2001 Working Truck Bobtail

A participation trophy

Sorry about that

Thanks to everybody. I didn't see the other posts until I made the last post

Thanks Mike

Jeanette and I appreciate it.

We had no idea we would do that well

Thanks again

Larry

Really? Black latex paint, I would haver never guessed that

Maybe I'm showing my age. The old timers would tire black their tires. I have tires on my B model that are discolored and I was trying to find tire black. I can remember Dupont made some at one time, like in the late 70's. Some of those guys would mix gasoline and maybe black paint, I can't remember for sure. If anybody has a solution for me let me know

Thanks

Fireman

'Bout the only requirements would be air-ride and decent winches/winch rail and maybe a box or two. I don't need a headboard, side kit and/or tarp(s).

It has about 14 winches or so and it is air ride spread axle

Also it has two 48" boxes and I'll throw in some tarps and straps. Let me know and I'll take pics and send them to you.

Hey Gambi

I'm looking to sell mine. It's a 88 Ravens 48' x 96" spread axle. I have a side kit (new panels acouple of years ago) for it too. The tarp is a rollover tarp. I know an 88 is old but it has good arch to it. New tires last year and brakes are fairly new and it has the dump valve for the rear axle. I don't pull it very much and when I do it's to haul grain so I figured I would just get an end dump.

Thanks

Larry

Ok, Let's look at this... Pop has a rawhide and now Mikey has a rawhide... hmmmmmmmmmm so is Mike Sr. the next one to get a rawhide?

We are getting there on the 13th. We are looking forward to seeing everyone. We are going to be showing the Rawhide and probably the R-Model.

Hey Trent

Do you have a part number and manufacturer for those rings around the gauges? I put some on my CHN but they were made for a P#$%&%^*t. I'd like to do the gauges in my R-Model

Thanks

Larry

I reworked my dash in my R-model a couple of years ago. Mine was an '82 model so it has the beige interior. I had the local paint shop match the paint of the dash and had spray bombs made up with that color. I chose a paint that was flexible and made to be applied to the vinyl dash. I also took the dash panels and found some contact vinyl that had wood grain on it. It wasn't a perfect match but I was happy with it. I also got a used interior kit from Superdog and installed it also, it had alot more panels than my truck came with.

Name: Mack CH-613 (2000)

Date Added: 28 June 2008 - 04:00 PM

Owner: FIREMAN

Short Description: This one pays for Maxine and the R-model.

View Vehicle

Name: Mack R-686ST (1982)

Date Added: 28 June 2008 - 03:58 PM

Owner: FIREMAN

Short Description: This one hauls Maxine around

View Vehicle

Name: Mack B-81SX (1959)

Date Added: 28 June 2008 - 03:56 PM

Owner: FIREMAN

Short Description: Maxine is our third child

View Vehicle