Jump to content

bothernd

Puppy Poster
  • Posts

    3
  • Joined

  • Last visited

Location

  • Location
    North Carolina

bothernd's Achievements

Rookie

Rookie (2/14)

  • First Post
  • Conversation Starter
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. I drive a Mack Ch613 with a E7 427hp and a 13spd Mack the truck has 4.54 rears, 44,000lb suspension with 46,000lb springs, and a 20,000lb drop axle with dual tires. We pull a 55 Ton Talbert Lowboy with a 28' well and the back tires covered for graders. I have hauled mainley paving equipment and excavators on this trailer and never had a problem with it and I've even seen it pull a 100,000lb Road Tech milling machine though I didn't get to drive with it.
  2. We have a 1999 Mack Ch613 equiped with E7@427HP. The truck devloped a slight knocking sound so we decided to take look at the valves and found they were all out of adjustment. We ajusted the valves and they went back out of adjustment as soon as it turned over. The guy at the engine shop that used to work for a Mack dealer tore it down for us and found it was a bad camshaft. We had a full inframe rebuild done and a new cam put in and truck seems to run fine, but now even pulling a light load I can barelly get it over 65MPH and when it knocked it would pull the same load at 75mph.
×
×
  • Create New...