doe70

gday, have just looked at engine number, no problems finding it and is clear except whether one is a G or number, guess what im wondering - do the 237 no's generally have a letter in them. mine is 673C-9G1639. thought it was a 6 but sure its not? any info appreciated. cheers

Hi just an update to firstly say thanks to rowdyrebel and gambi80 for their input, helped a lot. i went up this morning in pissing down rain, hooked two air lines together and kept ute far back so noise wasnt a problem, still dumped 110psi in under a minute and half, but found it was in fact a diaphram gone in one of rears, just held rubber supply hose together and put duct tape around it few times to pinch it off. then recharged system no probs, drove home good as gold. ill get around to pulling it out and looking at it soon. thanks again ellis

howdy, just did a long trip in early r600, drained oil after first 9 hrs but then drove another 10 and no probs. today i drove 10km and rear brakes started locking on as i was starting off, are now totally locked on, ive got full tank air in starter tank but main reseviour has none. thought it was compressor dead so hooked up mobile comp in back of ute with genset, guage shows pressure rising for about a minute then drops again. ive tried blanking off comp line and acc air lines but same happens - i cant see or hear any major leaks! have i just got oil into maxi valves? but then why no air pressure. Whats the best thing i can do, truck is on side of road still. is there an easy way to release brakes manually? all info would be appreciated. cheers ellis

thanks for that, yep fella said it was a 67' but is a bogie drive not single. ill look up info on that box no, thanks again.

Gday, firstly does anyone know what the chassis no R611RT3311 would be for, as in what set up it left the factory and what year it would be. definately a flintsone model, am guessing originally it had a C motor/quad set up. secondly what model number and year gearbox (mack) had a single stick ten speed - is set up in standard 5 pattern with air actuated R - N - L - D. is reverse in all gears, neutral, low and direct? - does that mean no overdrive? not sure but any and all info would be appreciated. cheers ellis

Howdy, was wondering if anyone has ideas on what fuel economy i can expect on a bogie drive primemover with 237 motor - not pulling a trailer on open road would be? If you can also state if your figures include US gallons, imperial or litres. cheers ellis

Thanks fellas, Guess im just naturally lazy and was hoping that someone out there might have had a truck painted in mack lightgreen - # 41989 and posted a pic of it, then i could have made a decision from that. Might just try and match a section behind air cleaner thats clean, mightnt be original but looks ok. cheers daryll

Gday, about to paint my truck, its colour has been a light green from at least 1962, but faded, rusted of course. Does anyone have a genuine photo or info on mack light green between 58' - 60'. Ive looked on net and plenty of green b models but no idea what their true colour is. I guess i could always take a colour chip from mine in some place where its not too faded but would like to keep it in an original mack colour. Any info would be greatly appreciated, especially if someone out there has painted theirs in that colour. cheers.

I dont have a factory fitted aux trans but a four speed spicer aux, trouble is that it would be very hard to get any photos showing linkages in any detail, as they are hidden under cab, hopefully someone else will have pics of transmission's set up during a restoration and prior to cab being mounted. sorry i cant offer any great insight. good luck.

hi, are there standard lengths for the b61 - tandems and also single and bogie tractor chassis's? or did they leave the factory in many different lengths. were they ever made to order? would be handy to know measurements from rear of cab to rail ends.. cheers

Thanks fellas, i guess ill do it in brown vinyl then, maybe mine are the original seats then, wasnt too sure. cheers

Hi, my b613 has badly torn brown seats in it, ive noticed pics of same models with green and even black seats. Was there a set colour as per interior paint or did it change over the years? Were they done originally in leather or vinyl? Im wanting to reupholster soon and would like to keep it as standard as possible. Any info would be appreciated. cheers..

Hi, can anyone tell me if and how its possible to tell the exact year of a b61 from the serial number. Is there a common list of batches made per year? thanks.