Bruce B.
-
Posts
0 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by Bruce B.
-
I have a treadle valve leaking air. 3 years ago I changed the original treadle valve out. And ran the truck for 2 summers. The new one started losing air thru the bottom. I changed this one out also because the reservoir holding the air brake anti-freeze & rust guard was empty. Thinking the valve got contaminants in it. But this 3rd valve is leaking air also. I changed out both check valves that did not help. This is a 1978 U600 single axil dump truck.
- Show previous comments 3 more
-
Oil in the air system? I know my wet tank exhausts air/oil each time I drain the wet tank. As far as the primary and secondary air tanks i have never seen oil exhaust there when draining. Can I connect a psi gauge on both primary and secondary air tanks? Will 1 show 120 psi and the problem supply tank show 60 psi? Or is all air connected @the treadle valve?
-
Not sure if your unit has a single system or a dual system. Older ones had a single air system. Air went from the wet tank to the dry tank and then to a single point on the treadle valve. Newer stuff had a dual system. Air was split into 2 separate systems so that, if one system failed, the other would still operate. I think those used a different treadle valve setup. I think those were split front/rear. Those dual systems were a little after most of what I had experience with.
There shouldn't be a difference in air pressure between the wet and dry tanks.
Here is a Bendix chart showing a typical dual system. I can hook you up with their troubleshooting guide (see link).