-
Posts
69 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by rz761
-
I did. They don't have any currently
-
-
Looking for some cx613 rims. Made in the early to mid 2000s. 607-725-3639
-
Have a decent pair of aluminum fuel tanks for a 60s 70s R model. Black paint over them. Has a remade step out of diamond plate on drivers side just from wear and tear. Call me if interested. $1000 Richie 607 725 3639
-
In ok shape. 283 with jake. 6 speed. 417 rear. Been sitting a while, needs some tinkering. $10,500obo
-
who?
-
engine is sold, that's for all that called. went to a good home yesterday.
-
Came out of a truck that was in a flash flood. Needs to be rebuilt or excellent for parts. complete other than compressor. drained oil and clean water came out. Was not started after flood. Would like to sell as a whole instead of parting it out. Was in a working truck before the flood. Any questions please call Richie (I don't check this forum daily) $3,000 607-725-3639
-
E6 350 9 speed 38,000 on Neway Double frame Cab was in the process of being repaired and close to being complete. $6,000 Any questions, call me 607-725-3639 Binghamton NY Richie
-
-
-
Have Mack 38,000 rears on camel back 4.17 ratio spoke hubs - $1,000 38,000 rear on Neway Air 4.42 ratio on Budds - $2,000 E6 350 4 valve with engine Brake running take out - $3,500 Double Bunk 63'' Sleeper off a Superliner with double cut outs for stacks - $1,000 Any interest pleae call me @ 607-725-3639. Thank you Richie
-
ok thanks, so basically I cant just order a ecm for an AI400 and get away with taking it down to get programmed? I got the correct ECM coming for it but just didnt want to get an underpowered ECM if I can get one thats set for 50 more horse for the same expense. Richie
-
We bought granite that was wrecked and are fixing it. The cab moved during the collision and dented the ECM on the motor. Couldnt get the engine to start so I suspected that the ECM was damaged and no longer got any power to it. I borrowed my friends diagnostic computer and sure enough, the ECM was not getting any power. To double check before I got a brand new one, we had a E-7 427 ECM to plug it just to make sure that it would start, and it did. I know there have been some discussions on here that the AI350 are horrible on power. When I called my local Mack dealer, I asked the questions, of can I turn the engine up to 400hp without doing anything to the turbo or changing components on the motor. They say yes, all I have to do is bring it down and they will up the power with their programming. But I guess my question is, I used a 427 ECM to see if it would start, and my diagnostic computer was reading that at the time when it was plugged in, it had 427hp. That was a nice sight to see. It almost made me want to leave it in there. Why cant I leave the 427 ECM in it, could damage be done to the motor? And can I buy a computer from mack that already has a 400hp setting on it so I dont have to take it to a dealer to get it turned up? Any advise would be greatly appreciated. Thanks RIchie
-
Second that Clay!!! Unfortunatly the E9's are harder and harder to find parts for and Volvo is running the prices up on Mack parts. Richie
-
Will a GU813 hood fit on a CT713 truck?
rz761 replied to rz761's topic in Modern Mack Truck General Discussion
Black granite is sold for way to much money. richie -
Will a GU813 hood fit on a CT713 truck?
rz761 posted a topic in Modern Mack Truck General Discussion
I have a 2006 CT713 and hood got damaged. I was looking for a nice used one and have come accross some but nothing promising. I found a hood that fits a 2012 GU813, looks the same. Any chance it is? Are the Granites with the set back front axle all share the same family of hoods? Richie -
In the market for a mack septic truck. 3600 gallon tank, no more than 4,000. Doesnt really matter the model. Would like to stay mechanical if I could. Anybody know of any out there that are for sale locally that may not be on the internet? Would like a nice one. let me know. Thanks Richie 607-725-3639
-
FOR SALE DM Roll Off and MR Front load garbage trucks
rz761 replied to rz761's topic in Trucks for Sale
its cable pull on type. not hook type. unsure of manufacturer. its heavy duty though. -
1982 DM686 285 w/ 6 speed 44 rears cab is rough $5,000 1997 MR front load garbage truck 300 w/ 5 speed 44 rears 482 ratio. $7,000 1996 Midliner Allison auto single axle. Runs and drives nice. $3500 Anyone interested please call Richie @ 607-725-3639
BigMackTrucks.com
BigMackTrucks.com is a support forum for antique, classic and modern Mack Trucks! The forum is owned and maintained by Watt's Truck Center, Inc. an independent, full service Mack dealer. The forums are not affiliated with Mack Trucks, Inc.
Our Vendors and Advertisers
Thank you for your support!