IGV
-
Posts
100 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by IGV
-
Ok thank you very much sir your help is greatly appreciate, thanks to everyone, I'll get back with an update.
-
Ok I will follow your instructions, this test is to check EUP's ? Seals?
-
Is that the plug you where talking about?
-
-
Ok, yes the truck is parked at shop
-
Yes I'm gonna do an oil analysis as soon as possible, do you think I shouldn't been driving the truck that way
-
Right side is my trucks oil left is my brother's
-
-
I think the eups are original haven't been changed recently, I just replaced one injector oring that was leaking
-
Top sample is my brother's truck oil and bottom my truck's oil, we both the the oil change the same date
-
-
Can you see the cardboard picture I sended one
-
It's smell like fuel to me
-
I did the halo test what you guys think
-
-
Hey guys I took a better look to the oil and it looks kinda thin, I know I need an oil sample but do you guys know how to check for fuel in oil ?
-
Ok will check thanks everyone will come with an update
-
Hey mowerman how are you, I'm guessing it di suddenly because one day I just noticed that it was 20 psi at idle hot and around 43 at high speed when it used to be around 30 at idle and 45 over 50 at full trottle, but since I noticed the oil pressure drop it's been dropping gradually, because now it's been dropping to 19 15 psi and barely go up to 40 full trottle.
-
Ok I'll keep it closed and I hope it stays closed for much longer, jajaja thanks 👍
-
Ok thanks I'll check the sensor, oil pressure and get back to you guys for an update, you guys are awesome I appreciate you all
-
Ok I will check the oil pressure with a gauge thanks,,, well I'm not an expert like you guys but I'm trying to learn because I'd like to be able to fix my truck my self because I like engines, jajaja, one more thing at cold start up the gauge needle stays down for a couple seconds and the very slowly starts to go up is that normal, thank you guys for your responses
-
No the oil does not run off like water, I'm been checking that also it looks ok, but what could cause the low oil pressure?
-
Good morning everyone, I have a 2005 mack cv713 427I and recently I have been noticed that oil pressure at idle had dropped from 30-25 to 20, hot and barely reaches 40 at high speeds when it used to go up at around 50 60 psi, do you guys think is normal or what could be issue? I hope you all can help me, thanks in advance
-
Good morning how is everybody doing, does any body knows how to adjust the on clucht on a Maxitorque T310M Tej speed transmission?. Thanks in advance
-
Ok thank you Mackpro, thank Joey Mack for all that good information I appreciate you all.
BMT Forum Logo
