instagatermm
-
Posts
3 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by instagatermm
-
From everything that i have heard, 2100 rpm is safe. 2200 to 2300 rpm may not hurt anything. A friend of mine told me that you can get them wound tight around 2375 rpm. I am not an expert by any means, But the truck i drive has a 1989 E6 and turns 2100rpm. Another driver turned his up to about 2250 rpm. He has a 1991, E7. He has been running at that rpm for over two years running about 3500 miles a week with no problems so far. I hope that this helps.
-
Is that the pre boost adjustment? And do you know what the other screw is? This is the first pump that i have messed with. I turned the gov up a little. It has always smoked like a freight train anyway. It is just real sluggish on the low end.
-
I have an E6 motor with an E7 bosch pump. I am not sure if it is an american or a robert. I have been playing with it a little bit. There is a cover on the back that had a seal on it. Inside is two screws with locking nuts. One has 8 mm nut, the other has 10mm nut. Can anyone tell me what these are and what they do. I turned the 10mm screw in about 3 turns and it made it more responsive. Am i messing up or what?
BMT Forum Logo
