5Mouths2Feed

Hi, I would first like to know what year computer engines were installed into Macks and what models. Next can the computer Macks HP be tuned like that of Cummins/Detroits? IE 350->380/400HP. or 400->430/450 hp etc. Thanks for the info

I've been looking into them also best I have found was at http://www.fleettruckparts.com/truck_parts/fenders.htm #30-7360 $171.25 Per side Full Tandem Double. Radius Diamond Plate Fenders #30-7488 $310.00 Mounting kit to mount 2 each Full Tandem Double Radius Fenders Less than $700 for the set. Thats the double turn down, They also have the single turn 1 or 2 axle and the individual axle cover type.

Who makes the T2180 Transmission? What are the gear ratios 1-18???? Most important is the final ratio? Can you determine the rear gears with the VIN? Has 44k rears.. VIN # 1M2AA14Y1SW054376 Thanks

I am in the market for a good used daycab to be used in NE-FL for the purpose of log hauling. I am familiar with Cummins and Detroits however I am ignorant to Mack engines. I am looking in the 90's model range. Specs that I am looking for with the non-Macks is 375-435hp, 3.70-3.90 gears, 9-10-13spd. Please excuse all the questonsbut, the only dumb question is the one you didn't ask. When did Mack begin using computer VS mechanical engines? How are Macks on milage? How do they compare in re: to longevity/maintenance? How are they re: HP/Torqe ??350???400???427??? Can they be turned up? Theres a multitude of E6-7 350hp's (93-99) but I do not want to be under powered. What do you think of this motor? Good and Bad experiences with Macks...Basically any infomation/opions on the 90's Macks will be helpful. I have recently seen a 93' with a 400hp. Is this a good unit.Thank You

I am in the market for a good used daycab to be used in NE-FL for the purpose of log hauling. I am familiar with Cummins and Detroits however I am ignorant to Mack engines. I am looking in the 90's model range. Specs that I am looking for with the non-Macks is 375-435hp, 3.70-3.90 gears, 9-10-13spd. How are Macks on milage? How do they compare in re: to longevity/maintenance? How are they re: HP/Torqe ??350???400???427??? can they be turned up? Thers a multitude of E6-7 350hp's (95-99) but I do not want to be under powered. Trannys? Good and Bad experiences with Macks...Basically any infomation/opions on the 90's Macks will be helpful. I have recently seen a 93' with a 400hp. Is this a good unit.Thank You