TOMD

yes but give me a call I have parts that will help you out

is it popping out the intake or exhaust?

hi pressure switch in line between condensor and dryer end of switch is green

i called watts mack today and checked on avil of brake parts for the old rusty dog.( the local mack dealer/parts house said that the parts i need were not avil any more )guess what i talked to tom told him what i need it took him about 1 min to look up all of the parts i asked about and the one they dont have in stock they will have next day and i will have them in 2/3 days so when i get the parts im going to be a prick and go to the mack parts store and ask them why they arent avil to them when everyone else can get them and show them the parts and i will tell them i will not be back. i will call watts for my parts ... joe

Thanks for the kind words joe. Glat to help anytime you need

Tom

Only one thing to say- WOW!!!!

Low coolant should have had the engine shut down lite also, no?

Not to derail, what is code 4-2. 2001 CX 613 w/ 427?

I know left side mirror does not work. Is that the code?

4-2 CODE IS FAN CLUTCH OUTPUT

I don't know about Illinois Dyno Center. But you could give me a call I've put together some different turbo,injector,reprogram combos

Thanks

Tom

1-888-304-6225

test

barker.mp3

Installing a hook up lamp on our 2008 cxu. We bought the light and new switch panel that has the button for the hook up lamp. Dealer tells us there should be a wire or two somewhere around the clutch pedal that you hook a harness you buy through Mack that goes to the hook up light, or can we just connect two of our own wires to the ones under the dash and run them to the light? I already have the panel behind the seats out and the hookup light in the cab is installed, we just need to know what wires under the dash to connect to. The only two that is seen with plug ends on not being used is one that is labeled "bat aux" and one labeled "ign. aux" and then theres one that says "cxu only" "chu only" and "gu only", i'v installed the fuse for the hook up lamp, but there is no power at either of these wire ends. Any help will be great. Thank you

Hope this schematic helps!

SCRN_CAP4.bmp

EXTERNAL OIL LINE KITS WERE ONLY USED ON E-TECH ENGINES.