gio400
-
Posts
74 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by gio400
-
What model and Hp engine you have?
-
Good day which turbo is better for a Mack etech 400 a Schwitzer s300 or a borgerwarner 174832 s400. Which will have better performance under heavy loads?
-
Ok, how about the American trucks, which is the strongest out off all of them
-
Good day I’m doing a survey to see which brand trucks have the strongest crash test rating
-
I ask because I have a series 60 380hp with a VGT turbo and it feels more aggressive than my Mack etech 400
-
Does the Mack etech turbo have a wastegate or it’s non wategated?
-
With 8ll and 6.14 ratio will give me 89.39 %reduction in ll and in ll reverse 93.45 % wouldn’t that be good
-
What’s the difference with Mack top loader vs meritor axles if they had the same differential ratio
-
44 meritor axles with 6.14 ratio
-
Truck is a 2001 with etech 400
-
How will do in a stop and start situation?
-
The hills is between 20-30% grade steep
-
Goodnight how will a Mack e7 400 with 8ll and 6.14 diff carrying 4000 gallon of water perform on hills 30-40% grade. Will turning off be good with 6.14 ratio
-
I notice the problem when I was going up a hill loaded and the truck started pooping and dumping black smoke
-
With the Viens stuck open , will the truck burn more fuel?
-
It’s a vnt turbo, so which means the vents were stuck on open, it’s a 2004 Detroit 12.7 series 60 egr
-
Will it be dumping a lot of fuel also?
-
What are the symptoms of an stuck open wastegate
-
I just discovered that the actuator is not connected to the waste gate think this the problem
-
I just discovered my turbo actuator was not connected to the waste gate, can this cause any major damage to the engine
-
Good day im looking for the fuel and oil filter number for a 2004 12.7 Detroit engine. I attach the engine info
-
These are the codes that show up when I connect a scanner to the engine
-
I have a Detroit 12.7 when on the flat have no problems, but when I’m the hills n building rpm it sometimes making a blowing huffing sound n puff black smoke, when building rpm. Have this happen to anyone or do anyone knows what cause this
-
Mack engine spitting oil out of oil cover when open
gio400 replied to gio400's question in Mack Truck Q & A
Ok thanx, when I saw that I thought I needed to do an overhaul -
Mack engine spitting oil out of oil cover when open
gio400 replied to gio400's question in Mack Truck Q & A
So this is nothing to worry about then?
BMT Forum Logo
