richard-b61

Hi Alexis, I sent you an email several days ago at the address you provided with no response. Looking for details on the fuel tank. Price, possible photos.

No, looking for a good one ready to install. 

Looking for a B61 Passenger side fuel tank (square) in good condition, no dents.

Looking for the chrome base the bulldog stands on for a B61. 

felicello122, mine is 180 degree and goes around a 8" in diameter muffler. I've heard of guys using R Model shields on the B Model. Can you send a pic?

Called Watts, and they said they have none, and did a country wide search, and said there are no more available in the system.

Looking for info to acquire a B Model muffler heat shield for my B61. Have the original, but kind of dinged up and has cracks.

Still need to call Watts, they don't list any head gaskets on their B Model pages.

Thanks  for the info Ron, I had a friend blow the head gasket on his B model last year so I thought I would buy a spare for mine since parts are getting harder to find. 

They have some, but they need to know the head bolt pattern, and I would have to pull my valve covers. 

thanks Willie

Was wondering if anyone could point me in the right direction to find a END673 (Non-Turbo) head gasket.

Thanks for the info guys!

Anyone know what size foam rubber seal Works best in the door channel on the B Model? 

Just wondering if any of you B61 owners who have worked on the B Model shutter actuator could share troubleshooting information. The one on my truck (1961 B61 END673) didn't work when I got it. Haven't taken it apart, but it may have bad seals inside. Looks like a simple system, but not sure how it's suppose to work since I've never seen one work. Just another learning curve right? Any info would be helpful. Thanks

No thanks, that one is a little worn and has a dent.

Anyone out there have one B Model hubcap their willing to sell with good chrome on it and dent free? I know Watts Mack has them, but why not look for a good used one first. I'll be putting it on my B61, where it belongs.

I have a 1961 B61T single axel and Was wondering if there is a suitable air brake chamber out there that will replace the stock front and back chambers with no modifications. This is my first restoration and am learning as I go. Thanks

Looking for the set of B Model dash toggles and name plates for the slippery/dry roads, and truck/ tractor protect on the lower center dash. Mine were broken off when I got the truck. The name plates are scratched and worn.

Thank you.

Before I start searching the thru the dirt on the engine of my B61 for the engine info, is there an information stamp or plate some place on it that tells weather it's an END-673 P, C? All I know is that it's an END-673 non-turbo.

Looking for a flywheel for my B Model. Engine is a END673, not sure if all B Model flywheels are the same.

Also looking for a set of thermodyne emblems and one hubcap.

Anyone one have a used Model B hubcap with good chrome in good condition? Just need one. Last stop...Watts

Mines a little beat up, but thats what it looks like.

Rich

Sounds good Larry.

Anyone know who would carry, or where to get a closest to original B61 Model muffler guard/heat shield with the round holes? 180 degree, 35" long.