TJ Lincoln
-
Posts
14 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by TJ Lincoln
-
That 54 International COE in the picture needs a new home. Was driven in. There’s a 6 BT Cummins with trans that was planned to go in, it’s also available. If anyone knows someone who is interested?
-
Engine with transmission and PTO. Break in miles only. Sitting for years. Upgraded to newer engine. $750.
-
Don’t know how far you are on your 47 Fire rig. However I have a fresh reman engine out of a 48 EE plus the 4 speed PTO trans. Have a 47 EE also. Not going to use the engine as I have either a 12 valve Cummins or a big block Ford I can use.
-
47 EE with original flatbed flatbed. Cab off rebuild has Painted cab and front clip back on along with all running gear. All parts to finish included. Clear Oregon title. 48 EE with double ram steel flatbed dump. For parts, engine ran, front clip very good salvage candidate, cab is a rust bucket. All major parts are there. No title. Located in Eastern Washington.
-
Have no Detroit parts but easily found a booster for my 47 EE maybe 5 years ago online. GM used that same part into the 70's.
-
I have a running engine I pulled with M600E 407 H cast on it. Another in replaced it with has the same number ending in O. These are EN271 continental engines. Don't have plans to keep the engine I pulled. Don't see any cracks and it ran fine when I pulled it. In fact I have the complete truck available for parts.
-
E Model Windshield Frame
TJ Lincoln replied to Livinlo's topic in Antique and Classic Mack Trucks General Discussion
I have one if you are still looking? -
Got 2, one 47 EE has a perfect rebuilt body just painted and ready to reassemble plus a second parts truck. Second is a rough 48 EE, both are complete.
-
12 valve in a E model Mack
TJ Lincoln replied to ggreen's topic in Antique and Classic Mack Trucks General Discussion
FYI, I set a 12v with trans, in my EE. Only problem I found was that the battery wire stud would not clear the steering box by about an inch. 12v came out of a 127k mile F-700 with truck mounts (not the car mounts used in pick ups) and the mounts lined up with the stock mounting points. In the meantime I found another complete EE with a remanned engine and trans, so opted to stay stock. If anyone is interested in parts, I have the complete F-700 and 48 EE sitting in dry Eastern Washington. -
I have a 48 EE parts truck if you are still looking for window parts? Also saw one on CL for $500 for the truck but it's in Bellingham Washington. It's where my trucks are also.
-
Looking for a Cab & doors to fit a 48 EE. Left out in rain with windows missing. Rest of truck is ok + engine & trans are reman. Got for minor trim parts on a 47 EE. Willing to sell as is or replace cab.
-
THANKS. I AM A BIT OVERLOADED WITH CARS AND TRUCKS MYSELF, HENCE THE DECISION TO THIN THE FLEET. RIGHT NOW I AM AT WORK SO I PROBABLY WON'T UPLOAD PICS UNTIL THE WEEK END. THE PICTURE ON MY POST WITH THE JOHN DEERE IS THE TRUCK, TAKEN AT LAST YEARS QUINCY PARADE. I SAW A GUY FROM TRI CITIES POSTING TOO.
-
STOCK SURVIVOR. 6 CYL GAS 4 SPEED. HAVE USED TO HAUL TRACTOR, PICK UP AND MATERIAL. NO BODY DAMAGE. LOCATED IN DRY EASTERN WASHINGTON. IF INTERESTED CAN SEND PHOTOS. $12,000. EMAIL QUICKYELLOWCOBRA@GMAIL.COM
-
STOCK SURVIVOR. 6 CYL GAS 4 SPEED. HAVE USED TO HAUL TRACTOR, PICK UP AND MATERIAL. NO BODY DAMAGE. LOCATED IN DRY EASTERN WASHINGTON. IF INTERESTED CAN SEND PHOTOS. EMAIL QUICKYELLOWCOBRA@GMAIL.COM
-
If you're interested, I have an original (survivor) '47 EE flatbed, I recently made a loaded 300 mile trip with. I'd like to replace a piece of missing hood trim and the windshield crank handle if anyone has them.
-
36 Chev
Images added to a gallery album owned by TJ Lincoln in BMT Member's Gallery - Click here to view our member's albums!
-
old light trucks
Images added to a gallery album owned by TJ Lincoln in BMT Member's Gallery - Click here to view our member's albums!
Some of the oldies I have or have had in recent years.
BMT Forum Logo
