Jump to content
  • 0

Mr Philip Hopkins

Hopper 500



We have an V Mack 1 in our workshop at the moment, that has has both ECU replaced after an electrical spike, Engine ECU & FIM module.

both ECU'S programed by Mack in Brisbane.

we have rebuilt the econovance unit inspected and tested all the wiring and sensors.

we road test and after 10KLM fault code comes on 3/5 unexpected reaction, stop turn key off /restart and all ok for another 10KLM same fault returns.

Oil pressure tests ok, we have even disconnected the unit and it still faults at the 10 KLM mark.


we are at a loss as to the problem.


any help would be appreciated 




Philip Hopkins 


Southern truck centre


Link to comment
Share on other sites

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...