equipment machinest Posted June 11, 2013 Share Posted June 11, 2013 Hi I'm a machinest. A friend of mine was having problems with his detachable gooseneck lowboy the support arms were denting his frame. so I came up with a bolt on part to fix the problem being the round bars were point loading the frame the new system uses nylon blocks up against the frame rails. This new system barely scratches the paintWhat I would like to know is this a common thing and would it be worth marketing this system Quote Link to comment Share on other sites More sharing options...
slpwlker Posted June 12, 2013 Share Posted June 12, 2013 If it's bending the frame he needs a bigger truck. But like the idea. Quote Link to comment Share on other sites More sharing options...
equipment machinest Posted June 12, 2013 Author Share Posted June 12, 2013 It was denting the top of the frame rail where the arms hit he runs a construction business so he's always moving excavators to new jobs Quote Link to comment Share on other sites More sharing options...
slpwlker Posted June 12, 2013 Share Posted June 12, 2013 I run a heavy haul business and usually have no less then 90k on my back. I'll have to look at my frame where the neck supports go when detached. you got any pics of the pads? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.