jetro Posted June 23, 2010 Share Posted June 23, 2010 mack al460 little or no turbo in low range .It pulls ok in high range , but still is not worthy of a 460hp stamp on the engine. it takes about 5 seconds after your foot is to the floor before it starts to build turbo pressure. Quote Link to comment Share on other sites More sharing options...
rhasler Posted June 23, 2010 Share Posted June 23, 2010 mack al460 little or no turbo in low range .It pulls ok in high range , but still is not worthy of a 460hp stamp on the engine. it takes about 5 seconds after your foot is to the floor before it starts to build turbo pressure.There is new software that you can have enabled for this problem. A Mack dealership will need to contact Mack and have step 12B software enabled for your chassis. They will then have to flash and reprogram the modules per Macks instructions. Quote "Mebbe I'm too ugly and stupid to give up!" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.