MCHAM

Does anyone know how long Remack warranty takes to inspect a part to say if it good or bad, before they replace it? I put a Remack injector pump on my truck, and the pump has some issues going on. The Mack dealership told me I had to buy another $3800.oo pump and they will send mine back to Mack. If the pump is bad Mack will cut me a check. I don't have another $3800.00 right now so I'm going to pull the pump off and let them send it in. What I'm getting at, is how will it take for me to get a answer from Mack.

Found out the problem. Went to junkyard & got used power steering pump & now a 2yr old can turn the wheel

power steering fuild

I had a power steering hose leaking on my 92 RD690S. A fellow cut out the bad section and put it back together. Now ever since that was done it's like I have no power steering. Going around crubs the wheel wants to kick. Took it back to the guy and he change out the filter and put in power steering fluid. Still no luck. I'm thinking he got the hoses crossed up. Does this sound about right? Thanks for the help.

I have a RD690S Quad Dump truck, and I keep cracking the the rim around the lug nut on the driver's side. I'm about to put rim #4 on in the morn. The 1st and 2nd rims were alum. and the 3rd and 4th are steel. Does anyone out there know why I am having this issue? I want to put floats on the front of my truck, but I need to solve this issue 1st.

Will a truck burn more fuel and smoke going down the road when it's time to replace fuel filters?

Well, everyone my motor is good to go. I had a leaking injector that was leaking fuel into my oil causing the oil to overfill, smoke and real low oil pressure. Got an injector from Mack, fresh oil, and she runs like a champ. Oil pressure is running on 60, what more can I say.

Mack Dealership. I just got one for $110 with a $50 dollar core charge for my 92 RD

Chg oil 2wks ago. I usec Rotella 15w40 & put in a gallon of lucas.

I was coming in today in my ole 92 RD690, and she started rolling white smoke from the bottomside. I guss it was coming out the blowby tube. My truck has the em7 300hp engine in it. Does anyone know how much does a rebuild run? Also what would I have to change to swap in a 350hp?

My 1992 RD690 with a 300 E7 temp is going crazy, I got water coming out of the weep hole on the water pump. The temp will shoot up to 220 then drop back down to 190. Gray smoke is coming out my stack, is was Black until this started going on. A trucker behind me said my truck is putting out some knockout fumes. Does anybody have a clue to what I got going on? Thanks.

Good looking truck.

Who are there has a RD690S with the Alcoa Floats on the Front? What Size tires are ya'll running, and if you got some pics post them. Thanks.

What will cause a tire to wear on the inside on a tag axle? Thanks for the help.

I have a EM7 300 in my 1992 RD690S. I had the coolant system flushed when I got the truck. I just get that high temp when I'm coming out the hills with a load on my back.