rklahs
-
Posts
18 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by rklahs
-
-
what causes Mack 237 run away when started
-
i rewired my running lights,turn signals and brake sunday everything worked fine. Checked it out Monday before i left to get an inspection Failed no stop lights passenger side but signals work fine this is on rear could this have to do with signal switch in cab.
-
well guys thanks for your help it looks to me that can use old heads new block and old manifold with new turbo. Glue wire staples and duct tape thats got to fix it.
-
Hey guy thanks for all your help. It seems to me that i can use old heads as long as the exhaust manifold fits heads and turbo.
-
I spoke with a local rebuilder he said no. He said a late model head would work on the old block but old head would not work on newer style block. Couldnt tell me why.
-
Thanks for your reply. do you know if em6 head will swap with a head off a 675 237 hp
-
I have a cracked head on my em6 285 tip turbine 1987 Mack dm686s. Can i use a head off a 1977 237 675. Thanks Randy
-
#3 and 4 spit fuel but the other 4 seem to flow more than spit
-
I have a dm600 1968 dump runs great needs 2 or 3 rear tires 20 speed Quadraplex will stick in gear if your not carefull. Also 1969 Mack dump 9speed drive trains good needs tire batteries exhaust. Has a crack in frame behind cab.
-
Thanks for all your help guys i found a spare line and will pick up an injector this week , will let you know the results.
-
Hey guys does any one of a good place to order head gasket and injectors for this 87 Em6 two valve motor or would it be better to try to have the injector rebuilt. DM686S
-
No rag only #3 injector line was removed but help remove 3456 at pump to get line back on thats when he reversed lines 3,4.
-
Thanks for your replies and yes idid bleed air at injectors then started truck and bleed again but 3and4 were missing. Iknow now that it was because they were reversed. Do you think iblew the head gaskets on test drive about 4 miles.
-
changed injector line and helper crossed #3 with#4 at pump test drove about 4 miles checked line and put them back in order but still wont hit on 3 or 4 what damage could be done,
-
-
-
Name: Mack DM (1987)
Date Added: 29 August 2013 - 11:16 PM
Owner: rklahs
Short Description: tri axle dump
T673?
in Engine and Transmission
Posted
i HAVE A 1978 RL685LS endt675 MACK i GUESS A Maxidyne?