counterman6

I'm pretty sure this is an RD-600 replacement. I'll take some measurements and get back with you.

Brand-new sheet metal bent up by a shop in Worcester, MA. Genuine Mack piano hinge and trim. This unit was ordered by a customer of ours that decided to forego the project. Nice piece!

Thanks for looking.

-Phil

I have new, after-market units in stock at $1915 plus S&H. Let me know how I can help.

Thanks,

Phil

I found the alternator bracket. I'll keep looking.

Do you have a picture of a V-8 AC bracket? I may have one in the basket.

Kysor model 934029 A/C/ heater box assembly with under-dash duct work, compressor with bracket, hoses, accumulator and bracket, etc. Neat set-up, will need some tender-loving-attention.

What's your offer?

Thanks,

Phil

I have a 3" Hewitt P/N 1MT315P3. Shoot me an e-mail, I'll send you a picture.

Thanks,

Phil

phil@globaltrucktraders.com

We have a bunch of interior parts in both grey and beige. Stop up sometime, we're in New Hampshire.

603-239-7008

The rear-rear axle housing isn't bent, it's broken. As far as the windshield, not a scratch. The title for this thread came from a truck we cut a while back that had, "John, is your body up?" written in marker across the dash-board. Apparently John was known for this sort of behavior.

I just wonder how far off the ground the front end came up. Check out the pivot point for the dump body...it tore out completely. I sort of expected a bent steering wheel, hopefully this driver was wearing his/ her seat belt.

1996 RD- 0

Overpass- 1

We didn't get the dumpbody for some reason, just what's left of the truck. Too bad, it's a beautiful truck other than the ding in the frame...

I have a couple of the motors Rob has refered to. The little hootuses(technical term)that attach the motor to the window regulator are still on the doors but I can remove them if you are interested.

Thanks,

Phil

phil@globaltrucktraders.com

Rob,

Do you know the name of the outfit that has the trailer? Manchester isn't very far away, maybe we can check it out.

-Phil

How about now?

Somehow missed the "3" part in "3" spoke. Nevermind....

Will this one fit the bill? It's the hard plastic type with the newer horn button (which I will include). E-mail me at phil@globaltrucktraders.com and we'll make a deal.

Thanks,

Phil

We need to have two single axle Mack AWD trucks hauled from Buckhannon, W.V. to Winchester, New Hampshire. We need this done ASAP!

Please call 603-239-7008 and ask for Al.

Thank you very much-

Phil

I have several 2 valve Jake kits- complete- for sale. E-mail me or give me a call, I'd be happy to help you out.

Thanks,

Phil

I just remembered we have one in the warehouse (Scania engine) with an Allison automatic behind it.

We have had a few R400 single axles come through with 210 HP Scania engines. One had a large label on a valve cover that read "SAAB/ SCANIA- SWEDEN" with a five speed. behind it. I had a customer looking for a radiator for one the other day, I guess they are very dissimilar from a standard R model radiator, different layout and hose sizes.

I would swear we had one but I heve yet to find it. Sound like problem solved.

Take care,

Phil

I may be able to help. I'll get back with you in the morning.

Good evening,

Phil

Shared this joke with the guys at lunch today, we all had a pretty good laugh. Lots of "I hope it was a Fuller/ Ford/ GM/ Borg-Warner" etc.

Could it be the cruise control relay over heating? That may be an easy place to start.

"This here's the Rubber Duck"?