-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Q-TRANS
-
-
Have a 2000 CH 613 350 / 380 HP , 10 speed , 70" mid rise bunk ( not the 1 in my tag line ) and its overall average is 7.2 MPG
-
double post
-
My CH 613 was sitting in the USED MACK POUND along with 51 of its brothers and sisters ( had AUTOMATICS ) .. Went through every one of them , found the 1 with the lowest mileage and in great shape.
-
If its the EATON / FULLER 10 Speed heres the shift pattern
Low Range
R 2 4
1 3 5
Hi Range
R 7 9
6 8 10
-
Has anyone experienced CAM FAILURE / BREAKING in a E7 350/380 HP , also was there any prewarning or did it just go.
-
Usually there is a layout diagram pasted to the back of the panel that covers the electrical ( Fuses / relays ) my CH came with it as well as 8 electrical wiring prints ( very helpful ) of the entire electrical system.
The DRL relay is the upper RIGHT relay as MACK 3P noted
FLASHER ------------ DRL
DIODE ------------- SPARE
-
MACK needs to treat MACK owners / buyers a little bit better than they do. My local MACK dealer is CLOSED on Saturday, ( their VOLVO shop is open 24/7 ) have to drive 2 hours each way to a MACK parts dept.
Try and get some response from MACK is next to impossible , get the run around about everything and basically got the THATS NICE when I told them my next trucks will not be MACK. VOLVO side is complete 180' turn around
-
Any chance of the CAM in the NON MACKS lasting more than 350 - 480,000 miles and MACK telling you SORRY but never heard of 1 failing before
-
The way a few MACK DEALERS act and treat MACK owners you would think that VOLVO had already did away with the MACK brand.
Kind of maddening when your buying parts and 2 DEALER mechanics stand there laughing and calling the MACK junk!
-
Call the FREE
MACK ONE CALL CENTRE 1-800-866-1177 , need the VIN # and they should be able to help you out.
-
MACK has a retrofit kit for an EXTERNAL oil line for the engine brake, had mine serviced was still weak , they did the retofit and now its working like it should
5 Color 70's Logo Mudflaps
in Product Announcements & Group Buys
Posted
Barry
There is a place in Toronto , Ontario , Canada that does DIGITAL IMAGING for mud flaps , no min order for under $15.00 per mud flap , the flaps are the new plastic type. All thats required is a clean digital image of the desired logo.
www.tdi-imaging.com they do not show the mud flaps on the site but if you get in touch they will give you all the details.
With the CAN & USA $ at basically par might be a good deal.