losanonoskdb

fjh: I moved the sensor on the pump upwards to retard and all started working again. Econovance is working and in timing range again. Truck has good power again. I timed the pump to 8 with with the tap on the sensor window and the marks on the flywheel, and scanner say 11 at idle. You think i shout send the pump to a diesel lab to verify the position of the tone wheel ?. Thank you Klaus

Hi, i have a problem with the timing on a E7-400. Engine did not like 8 degrees static timing, it smokes very bad with a strong miss. The only position where engine runs without smoke in idle but still with a miss in high speed and lack of power is from 20 !! degress static timing. Computer sets code 35 (timing actuator).I checked all the wiring and conectors, changed the complete econovance unit two times to be sure. With these 20 degrees timing scanner displays 23 at idle to 31!! at high idle with the econovance plug disconected. If anyone could help please