Joy2all
-
Posts
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Joy2all
-
-
16 minutes ago, Hobert62 said:
Where are you from?
Saskatchewan ,Canada ... ..Have checked all over for rebuild or new one ...was hoping people on forum could help..
-
59 minutes ago, mowerman said:
lots of starter generater shops will do it...lotta parts still available and yes it might be your parallel switch or sylanoid or just a bad wire...bob
Armature is not good...
-
Hello Everyone ...
We need to replace our 24 volt starter on our 1956 B63 Mack Truck...This starter has the solenoids in the truck cab under the seat...The starter is 24 volts but lights etc are 12 volt...
Anyone have idea where we can get one to replace this starter...
All help appreciated
Joyce
-
Adding more info ...hope I can explain it correctly...there are 2- 12 volt batteries and 2- solenoids ...what we can figure is one battery actifies(sp) one solenoid and the other battery does the other solenoid...someone said its a parallel hookup ? whatever that means...
How do we check the solenoids ...
We rebuilt starter by putting new brushes in ...
-
We are needing the wiring diagram for our 1956 B63 ...Hope someone can help us or tell us where to find out ...
Thanks
Joyce
-
-
Ours is a 1956 B63 Mack....we use it to haul tree length timber for distance of 25 miles....It is used every winter for this job....We have a picker mounted on her and use it to load& unload....also to sort the logs and carry them to our sawmill.....Shes one great girl.....Thanks
Joyce
-
Can a 631GC5134 X model 53B085 turbo be used in place of::631GC5134 P6X model 53B087 turbo????
got the engine in but now the turbo isn't working
Joyce
-
Thanks everyone....its 34 qts.....
I'll be happy when all the changeover is done
Probably you guys will be also!!!!
Joyce
-
we are wondering what are the capacities for 237 engine or where to find out
-
Hi there Herb...ours is the wrong one I guess so have to figure something else out....
Also another question.....maybe you can tell me where to find out....
"How does Interaxle power divider work...also installed...a power divider lockout"
There must be some place to get this info!!!!lol
Thanks from the Saskatchewan dummy
Joyce
-
We are needing to know info on air cleaners....will the cleaner off the END 673 supply enough air for the 237 engine? or should we look for something different?
Joyce
-
We have purchased a 237 engine to replace a END673 in a B63 Mack
Can someone tell us what to watch for?
All help appreciated....
We can see theres differences in clutch diameter ???!!!
HELPPPP!!!
Joyce
-
Can a TR72-2 11KBA 5828BP2 tranny be used in place of TR72 11KBA 5266 P5 tranny...have a chance to get one out of Ohio shipped to Saskatchewan,Canada So want to make sure it'll work before buying.....
Thanks
Joyce
-
We have a chance to purchase a R686T Mack truck for $2000.00
Where can I find info on these models.....The B model site has me spoiled I guess....lol
Any help is appreciated greatly....its suppose to be 1981 year.....
Thanks a bunch
Joy
-
I installed a 237,5 speed in a b61 used the front snout and pulleys, water pump, used a R model top radiator hose, starter on the left side had clearance, had to raise the cab, radiator suport up 1" for bellhousing clearance,used R model rear engine mounts , i have a 315hp ,13 speed roadranger in a 63,b61 they used the old bellhousing with the starter on right side bottom, all 672cid engines are the same size inside and outside, the differince is the horsepower,fuel pump,turbo,intercooler injectors,i pulled the cab when i put the 237,5 speed in made it alot easyer. that is my 2 cents. Ron
Thanks to alll....have no idea if we'll go ahead or not....auction sale is sunday ...we'll see what the engine goes for......there is a truck with 300 plus motor in it...maybe it'll go cheap enough!!!LOL
thanks again
Joyce
-
We need to know if a Mack 300 will fit into a B63 1956 truck which currently has a 673 non turbo??
Any help ???
Joyce
Starter problems...or where to buy one...
in Antique and Classic Mack Trucks General Discussion
Posted
Yep...we is in the sticks BUT my elders all came from good ole USA...yep both sides...lols& proud of it...