wingrider
-
Posts
101 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Everything posted by wingrider
-
This one must have had a tilt bed on it. Has a Pto with levers coming in through the floor. Of course the pics don’t want to show. -
Hard to say. It looks like it was mounted that way. Wrote to the Mack museum to see what the serial number could show me.
-
Love this feature…
-
Frame shot
-
Seems that is a 23984
-
Will have to look for the number on the frame…
-
Had to crawl through the passenger door. Anyone want to take a stab at this serial number?
-
First time I have been in the cab.
-
She has traveled some miles….
-
Which website would this be?
-
That is my hope....Have heard that in original form 60 may have been tops. The 3.91's will certainly lower the revs down.
-
On the plus side, they just dropped my truck off at my house. Wife wondered where that came from? 🤣
-
Lucky for me, I do know how to weld and fabricate. My Dad was a pipefitter, so learned a lot at a young age.
-
I know you had pictures at one time of what you cut from the cab, but they no longer show up. Do you by chance still have those pics?
-
Being I have the frame from the CH, I think I can add that to the original to extend it a bit. That way I could keep the rear suspension on its original frame, and get a good section to extend it. Up until I was thinking of the sleeper, I originally thought of going with a 156” wheelbase. Now perhaps I would go closer to 180” to add a 36” sleeper?
-
Alright, crazy thought, but been thinking about putting a sleeper on the B….do you feel it would look out of place on a single rear truck? We will most likely always have a dog that rides with us (wife and I), and the current one is darn tall, and could use the bunk as a bed. Thoughts?
-
Thanks! I don't know why I didn't think of that!
-
If I wanted to run air ride in the front of this when it is all together, anyone give me hints on how to do it?
-
Let’s hope so!
-
Once it shows up here, then we will know for sure what engine is in it. The fella I bought it from has never even tried to turn it over.
-
I am just hoping the engine isn’t froze up.
-
Yea, not sure why there is a limit on the likes. Could anyone tell me if my high rear end will work with the original setup?
-
Thought folks would like to know, that the frame rails on the CH are 34”apart. My B is suppose to show up next week I think is 33.5, so they may work ok.
-
Awesome! Can’t like anything more today, but will tomorrow.
-
I know they are apples and oranges in comparison, but to a small extent, I am guessing they act slightly similar…of course these are 50+ years apart, and I don’t have any experience with the older diesels except in tractors, which is again a different animal.
BMT Forum Logo
