JMetz

6NZ is a C-15, and a highly sought after pre emission Cat motor. Often referred to as one of the best Cat motors produced.

Yes sir! Thanks, My pride n joy. A 2002 with a 6NZ!

Thanks for all the help guys. Was able to source a gold Bulldog off eBay. I assumed it was used, nope must be a new old stock one. Fit like a glove on the old girl! Would like to find a good used lower grill section (looks like a Pheasant hit it) and cracked one plastic headlight bezel. If you know of a salvage yard or have these pieces please contact me. I bought new clearance light lenses, but need the foam gaskets as the old ones are very very brittle and falling apart. Any ideas to replace the 5 foam gaskets and o rings? If anyone is in need of the smaller chrome bulldog I have (1" space feet thread holes), get a hold of me.

What was the smaller dog I have originally mounted on? Anyone looking for one let me know.

Thank you sir! Very informative.

The bulldog I bought has legs 1” apart and has a part #87931. This bracket on my truck has two holes about 1.25” apart. Your saying no in between base needed just a bulldog with wider feet. Anyone know a part number of bulldog that bolts onto my mount?

Hello, recently acquired a nice old Mack cabover to use on my farm. It’s an all Mack one (Mack 350, Mack 9 speed and Mack rears). Someone removed the bulldog off the front. I bought a used bulldog off eBay but still need the base. Truck has the bracket mounted, with two holes just a bit wider than my bulldogs feet. Anyone know what the part number is for the correct base to go on my truck?