Jump to content

michael c

Puppy Poster
  • Posts

    32
  • Joined

  • Last visited

Posts posted by michael c

  1. Went back got more pics. I have tried the guy just won't let it go. It is my grandads old truck. Weather and vandals are not doing it any good...... 😧

    20170302_112108.jpg

  2. Im about 99% sure this is my grandads old truck also. I didnt mention it to the owner i figured it would "cost" me more if he knows it has personal value...... Which i didnt figure it even existed anymore its been gone for about 40 years and the fact i happened accross it out for a drive is probably a billion to one chance.

  3. I have  a 1995 RB tri axle i lost air pressure to my parking brake valve. I cant tell where the supply line comes from if there is a stuck valve somewhere else or an obstruction? Also lost air to the transmission range conrtols at the same time. Parking brake valve has three lines one should be pressure and i belive its the 3/8 line. I took the air line off that supplies the service side of the air gague and moved what i think is the pressure side of the parking brake valve. Then put the origional line off the valve in the spot for the pressure switch on the valve to get me home. Anyone had this problem or know where to start looking? Thanks Mike

  4. Having problems with a t2070 7 spd. Transmission dosnt want to shift from hi to lo well. It will shift lo to hi easy when you get it there. Replaced shift control on shifter and vlave on tranny. Transmission has a pto neutral switch on the dash that will cut the tranny into neutral. If you fiddle with it it will shift to lo. Need an air system diagram for the switch to try and frind the problem.

  5. I am looking to buy a B 57 in any reasonable condition. If you know where one might be available feel free to contact me any time childresstrucking@yahoo.com or cell (812) 239-3962 thanks, michael

  6. I have a couple of DM 690's the one I just bought has a bad body pannel on passenger side that the lower mirror bracket bolts to. I am unbolting the pannel and the three bolts that go to the cab behind the aircleaner the welds on the nuts broke. I cannot tell where the nuts are to get to them? It looks like if I remove the bottem passenger door hinge they might be inside the door jam frame. Dose anybody know?

×
×
  • Create New...