Jump to content

Xtra7973

Puppy Poster
  • Posts

    4
  • Joined

  • Last visited

Xtra7973's Achievements

Newbie

Newbie (1/14)

  • Reacting Well Rare
  • First Post
  • Week One Done
  • One Month Later
  • Conversation Starter

Recent Badges

1

Reputation

  1. So this Mack I'm getting to know pretty well. It's getting completely rebuilt, one part at a time. The question I have is, the mechanic said the oil level/temperature sensor is bad. No matter what dealer i call, or site I look on, all I get is the oil pressure sensor, the one in the pan they say doesn't fit this truck. Maybe it doesn't? Can anyone verify the VIN on this truck? I'd also love a source on the mirrors this truck has, I believe it's the Rawhide edition. Next to impossible to find. The VIN # 1M1AN07Y69N004426 and it's a 2009 Mack CHU613 I'd like to thank everyone in advance, this forum has helped so much already to keep this truck rolling.
  2. I know this thread is older, but I wanted to update it. Turns out the driver was pooping fuses in the fuse box like tic tacs, if it was a 15 amp fuse, didn't matter just stick another in. Replaced the now melted fuse panel, trace a short, it all works fine now. Thankfully multiple mechanics looked at it. The first mechanic was sure be traced the short under the valve cover, second mechanic found it by accident, next to a aftermarket filter kit that someone put on that this truck didn't need, so in the removal process, the short was found due to the aftermarket kit that was installed. Thank you all for your help in keeping this truck rolling!
  3. Hello all. I have a 2009 Mack CHU613 cruise and jake don't work. The fuse for the cruise, 10 amp blows immediately when I turn the key on. I have the lightning bolt and was trying to get the code, but I'm assuming you need the cruise fuse to work to get that 2 digit code. I have replaced the whole fuse panel in it, as a couple slots were real sloppy. We've tested the wiring from the switch all the way up to the valve covers where the jake solenoids are and all wires check ok with continuity. Any and all help or suggestions would be greatly appreciated. Thanks for your help or suggestions in advance. Also. the driver who's been driving Macks for ever has a question about a button, it looks like a key. Its the second button from the right or third from the left, any guesses? Thanks again.
×
×
  • Create New...