Coasta101
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Coasta101
-
-
Anyone have a diagram to the relays? Wipers have stopped working.
When moving the wiper toggle switch you can hear the relay click on then off 1 time for each detent of the toggle switch. (Not continuously clicking)
I have replaces the relay that is clicking. Same issue. Thought the motor may be bad, but same issue with it disconnected. Any other suggestions?
-
My windshield wipers are only working part of the time. The when toggleing the switch you can hear 2 clicks back to back in the center of the dash, so I dont think its the switch. Is it the relay possibly? Location? Mechanic said something about a thermal switch?
-
Mackpro appreciate it. Checked all of those and tried resetting the code to no avail. Think it was a bad/weak ground causing the issue. The grounding cables on the battery had corrosion between the inside of the lug and cable. New cable and code went away. Dont know if it was the ground or just leaving all the computers without power overnight.
- 2
-
On 9/1/2022 at 10:09 AM, Mackpro said:
You have a model and last 6 of vin and I can run it through tech tool . It’s the low speed data link for the dash cluster
CXU613 . 076870
-
-
-
-
First, do these engines have an oil sample port? If so where?
Second, what oil is recommended for these engines? Dont have the OM yet. I know the previous owner was running Kendall 10-30, but would it be a bad idea to switch it to 15w40 that way I'm only carrying 1 diesel oil.
2016 Pinnacle Wiper not working.
in Modern Mack Truck General Discussion
Posted
Thanks.