Jump to content

Coasta101

Puppy Poster
  • Posts

    9
  • Joined

  • Last visited

Everything posted by Coasta101

  1. Anyone have a diagram to the relays? Wipers have stopped working. When moving the wiper toggle switch you can hear the relay click on then off 1 time for each detent of the toggle switch. (Not continuously clicking) I have replaces the relay that is clicking. Same issue. Thought the motor may be bad, but same issue with it disconnected. Any other suggestions?
  2. My windshield wipers are only working part of the time. The when toggleing the switch you can hear 2 clicks back to back in the center of the dash, so I dont think its the switch. Is it the relay possibly? Location? Mechanic said something about a thermal switch?
  3. Mackpro appreciate it. Checked all of those and tried resetting the code to no avail. Think it was a bad/weak ground causing the issue. The grounding cables on the battery had corrosion between the inside of the lug and cable. New cable and code went away. Dont know if it was the ground or just leaving all the computers without power overnight.
  4. Any help with this code. MID 140, SID 250, FMI 9.
  5. Had the check engine light pop on this afternoon. Is there any easy way to see the actual code. I scrolled through the cluster menu to Diagnostic and the only two options that I had was for the Cluster diagnose and the Cluster part numbers as shown in the attachment below
  6. First, do these engines have an oil sample port? If so where? Second, what oil is recommended for these engines? Dont have the OM yet. I know the previous owner was running Kendall 10-30, but would it be a bad idea to switch it to 15w40 that way I'm only carrying 1 diesel oil.
×
×
  • Create New...