Mps
-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Mps
-
-
At what temp dose fan kick on also will it come on when ac is put on. It’s only 60 degrees but I can’t get fan to come on. Truck ran hot on my driver twice but he can’t tell me if fan came on. I have it and cannot make fan come on. But temp is below 190.
-
On 2/12/2019 at 9:40 AM, Mackpro said:
A VMAC 2 ecm will only fit a VMAC 2. However there’s a jumper harness kit for certain VMAC 1 trucks to use the VMAC 2 ecm. VMAC 2 ecm part numbers start with a 12ms59m, m2, m3, m4, m5, m6, m7, m8, m9, m10, m11 and reman m11x
Where can I find that jumper. I have a 93 vmac1 that I have been chasing code 35 problems that I am looking posible to swap ot computer to test but I can’t find any 1’s
-
Hi guys looking for some help I have a 12 pinnicale with a Delphi radio. It is lock out showing code. I called Mack a I have the code but I can’t figure out how to enter it. Ever button I push screen go’s blank then I have to reset power to make come back on. Thanks in advance.
-
Whats the blink #?
Think it would be 35
-
I used a otc he scanner 128 020 7 Sid is what I got I will use blink code next time I use truck. If that helps
-
I had one doing the same thing it was turbo no fins left. Not gettin proper boost choking it out.
-
Is the whole electric system shutting down or just motor when it happens how about hitting bumps on road will it do it more or less.
- 1
-
Hi guys I have a 93 e7400 vmac1 I get a timing actuator mechanical system not responding properly and it derates only time it throws this code is a long hard pull when loaded. Any ideas where to start. Thanks in advance.
2012 mp8 chu.
in Engine and Transmission
Posted
Cool logic I can make it come on but unplugging. Trying to figure if bad connector or sensor