Trenchking
-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Trenchking
-
-
Rochester diesel. Has some nice set ups
-
Guess the air compressor is my next step! Checked for exhaust gases in coolant several times, nothing shows up!
-
Knelsonrepair, did you ever get the problem figured out? My 98 is doing the same thing,run it about 60 miles & pushing coolant out!
-
Haven't replaced the cap,but plugged vent will cause same symptoms, right? Trying to get back on the road for now, going to update the tank setup asap!
-
Chasing a coolant overflow problem!
Found that the vent hose from the upper radiator hose to the surge tank was plugged! Will that cause my overflow problem?
98 ch613 355/380 E7 etec
Thanks
-
Found out that the vent hose was plugged,runs from the top radiator hose to the surge tank! If that's plugged will it cause my problem, I'm not sure, would like to think so! If it can't vent, will it overflow out catch can?
-
Never heard of a block ck tester!
Can't block compressor lines! I do have pressure tester, but that won't tell you if it the compressor or head gasket! Motor only has 200 thousand on a Mack inframe! Just not sure how come it ran for 100 miles perfectly after new pump and thermostat,then instantly acted up!
-
98 613,E7 etec,355/380, ran fine yesterday, first couple hrs this morning, excessive coolant being returned to surge tank, heater hoses go cold instancely, changed water pump and thermostat, work perfectly for 100 or so miles, right back to doing it again! Compressor maybe?
Any ideas?
Thanks
-
What should signal voltage be?
Pretty sure it's not hitting sides of the tank!
I'll run a ground, directly to the battery,& see what that does
Thanks
-
98 ch 613
Changed fuel tank sending unit, still don't read right! Never reads above 5/8 of a tank, sometime between 0 & 5/8 just randomly moves between empty & 5/8, no set pattern.
Could it be the gauge itself, maybe?
Or what?
Thanks
HP
-
98 ch 600
Anyone know of the top of your head bulb number for dash lights, really don't want to tear dash open, just to get number!
Thanks
-
Thanks
-
That's what I thought, going to try different dealer tomorrow,or at least different parts guy!
Thanks
-
98 CH 355/380
There is a little return fuel line from back of head to a fitting down by EUP's
Looks like 1/8" or so & braided I think, anyone know what Mack calls it?
Dealer I tried yesterday, couldn't find it/ wasn't sure what I was talking about, going to try different dealer tomorrow
-
Went for a drive, lighting bolt still on 4-2 code,fan working fine! Now what?
-
Air selinoid went bad , changed in out, how do I erase codes
-
4_2 code
98 CH 600 Maxicruise
Line code says 355/380
Has the 6 external EUP's& injection lines if that helps
-
Can someone please tell me how to get the blink codes? Lighting bolt is on steady, Truck runs fine!
98 CH613
Thanks
Eup 1997 E7
in Engine and Transmission
Posted
Rochester diesel