hdfx81

On 1/21/2019 at 8:56 AM, harrybarbon said:

There is a company here in Aus that makes fiberglass r - model, superliner 1 & 2 and Aus Valueliner fender flares - $Aus 300 plus delivery for the pair and includes rubbers and stainless steel fasteners,

Do you have the name of the company that makes these flares for a Superliner2?  I know Hi-Way truck accessories carries them but they are $800+ aus which comes to $500+ US without shipping.

Anyone ever find where to get custom grill for Superliner?

Thanks

Looking to put GPS speedo and electronic tach in my 87 Superliner, need to know what size gauges I need to fit in dash holes. Truck is in shop so I can't get to it to measure holes, can anyone help me out? Somebody told me it's 3 3/8" gauges, just wanted to make sure before I order them. Thanks!

superdog405, do you have some pics and measurements so I can make some?

Anybody know where I can get the brackets for the hood alignment wheels for my 87 superliner I need both sides, can still get alignment wheels but brackets not available thru Mack.  

Still looking for engine cross member for superliner with cat engine if anyone can help. 

Need a front engine crossmember for a RW753 superliner w/3406B cat engine also need the motor mount bracket that bolts to the crossmember.

Beautiful job, I have a 87 RW753 and my front engine mount crossmember broke do you have any idea where I could find one also need the motor mount bracket since the holes for the rubbers are wallowed out. Any help locating parts would be appreciated.

Last six 001217, Thanks

Don't know if this is the right forum, I need a front engine cross member  for a 87 RW753 Superliner with a cat 3406B motor Part #10QL4296, local Mack dealer says not available anymore. Could also use the lower motor mount that bolts to the cross member and the upper mount that bolts to the engine. 

Thanks Terry, I found the line that runs into the cab don't know if it's the one to the stop light switch but it only has pressure when foot pedal is applied, spliced a tee in it and ran a line to the application gauge and it seems to work ok.

Hello, where do I find the brake light switch on my 87 RW753 and can I install a tee fitting and hook up a brake application gauge there?

Thanks guys, that really helps I guess I can just use self tapping bolts.

Just picked up a external power window unit that bolts to the door panel over the window crank shaft, anyone have a pic of one mounted.

7 hours ago, 1958 F.W.D. said:

Have you checked with the Mack Store at the Customer Center and Museum in Allentown?

 

Looked and didn't see any.

Anyone out there know where I can get suspenders with Mack on them to hold my pants up?

Do you still have the stone guards?

Maybe I would be better off just putting all new manual slack adjusters since I am under the truck every weekend to grease it and do a visual inspection to make sure all is right.

Thanks for all the info guys.

What's involved to update my slack adjusters to self adjusting on my 87 superliner with Rockwell rears?

This is the one I got, does it go in fairly easy or should I chill it in the freezer overnite to shrink it for an easier install then tack weld it?

One of the top kingpin caps was missing on my 87 superliner went to mack and was told mack changed the style of the caps, the one they gave me looks like a freeze plug(just a disk with a slight curve). I put in on and when I grease the kingpin the it pushes out the cap. I found the original type and was wondering if there is a certin way to install it. I will take some pics later and post them.

One of the top kingpin caps was missing on my 87 superliner went to mack and was told mack changed the style of the caps, the one they gave me looks like a freeze plug(just a disk with a slight curve). I put in on and when I grease the kingpin the it pushes out the cap. I found the original type and was wondering if there is a certin way to install it. I will take some pics later and post them.