R R Dean
-
Posts
5 -
Joined
-
Last visited
R R Dean's Achievements
-
Okay I will try switching it with the fuel pressure sensor. I did find what I believe to be the cam or timing sensor is wet but can't seem to get it unplugged. It is located right below the valve cover on the front left of the motor anyone had one of these off before.
-
Trucks shuts off for a few seconds while driving then comes back on. Oil pressure goes to zero, all gages drop motor basically quits. I checked all the grounds frame and cab can't find anything loose. Anyone with any ideas would be helpful.
-
We had tons of problems with the dpf system on the exhaust. Had all the sensors replaced and seventh injector replaced several times. Figure it has to be a bad ground or loose connection somewhere.
-
No codes recently. After dealer installed new ecm. I checked all grounds on firewall,in cab, on the frame. Everything seems to be good there. It's got me confused.
-
Truck will shut down while driving, I mean completely loss of electric, power steering and motor. Within a few seconds everything comes back on. Any ideas?
BMT Forum Logo
