PaulR

Yes I was just reading on it was about to do the short cut but decided not to. I will try and continue working on it today. Thanks for the info!

I'm doing inframe on it to cause not sure how many miles on it. Thanks for the info btw does the lifter come out to the bottom? Might need to replace couple as cam lobes on cyl 3 5 was damage also is it normal for the eup spring to rub on the inside of eup rollers. Thanks again!

Hi to all! I'm new to Mack can anyone tell me how to remove camshaft on E7 also what to watch out for when replacing them. I've gotten as far as removing the heads,push rods,eup,eup roller,front cover and cam gear thrust plate retaining bolt cant remove the lifters is there any tool for it? Thanks!

Hi To all I'm looking for a engine 99 E7 460 Runner don't care much on miles as long as there is no problem on it Oil leak around gasket is not an issue as long as its not blow by. Thanks!

It's actually a tractor hook to dump trailer for local only can't find a 460 at salvage yard around only one they have are 350 but lf hand side ecm. Still unsure about the hp but we have one w/350 and still do the work.

Is there any way to increase hp on 350

Hi to all! Is lf hand rt hand ecm on e7 etec interchangeable? Would 350 hp enough to replace a 460 hp? Thanks!

Hi to all! I'm Paul and need help on 1999 Mack E7 460 engine I'm rebuilding. Truck was bought with deferent engine, the current engine that's on it now has no more tag plate only number I have is the S/N on the block 7S1731 but the dealer need the 11GB number or assembly number from the tag. I called Mack tech support and they told me that they can't go with engine S/N they need the vin of truck? Hoping somebody can point me in the right direction where to find the 11gb number other than the valve cover. Thanks!!!