Amos V.

Goodmorning, Sorry for the late response. This cold snap makes life difficult to find time lately. The price is pretty much as low as i can go, and I am only trying to break even from what I have into them. The Superliner sleeper with all parts and original interior is $1,500. and the Ford LTL900 sleeper complete with the original frame cradle is $2,500. I would do a package deal of $3,800 for both. They are getting hard to find. They are very much snowed/froze in right now and I would recommend looking at them after the thaw. I have a bunch of guys claiming to come look at them IF I still have them by Spring. I am in Sweet Valley, PA. 18656. Thanks for the interest!

Amos (570)822-9430

01/17/2026.  Let's finish our MACK projects this year!!!! LMFAO!!!!  Well, I still have (2) sleepers for sale. "NOT FREE" or "BASKET CASES". Both restorable and one already started and partially disassembled. One is a 60'' Able Body Co. sleeper for a MACK Superliner. Sleeper is a dual stack cut out. I started to restore this sleeper and began to disassemble and removed most of the damaged panels, insulation and dry rotted plywood floor and brown interior. Doors were also removed. I kept all of the parts I removed to use a templets. The frame structure is solid with NO rot or rust through. OEM HVAC unit included. Most of the hard work of stripping it down to bare bones is nearly done. Make me a serious offer.. 

I also have a 60'' Able Body Flat Roof from a Ford LTL9000 with gray interior in very nice condition. LMK with any questions. Post will stay up until one or both will sell. Also have them listed on Mack and Ford forums as well. Make me a serious offer..

Buy one or both. I may make a package deal to serious offers. I am located in Sweet Valley, PA. 18656. As everyone is well aware in this hobby, these sleepers are getting very difficult to find. Thanks!!!

Amos Cell: 570-822-9430

Pictures upon request or just come look at them and see. Check Facebook forums too!! Thanks!!

Still have both as of 05/07/2025. Just moved both to other side of yard out of the way. Thanks for the interest, make an offer for one or both. 

Ok I will check around. Thanks!!

Hello!!!! No Sir, I still have the Ford and Mack with cut outs. I started to restore it but found a period correct one for the RS700L which will be going on it as soon as the pole barn is up. Text, call or LMK if your interested. 570-822-9430. Thanks!! 

Amos / Palawman@aol.com

Hey guys, I am looking for a defect free/crack free, left and right hand set of Mack WS Cruiseliner windshields for my project. Let me know what you may have. Thanks!!!

UPDATE... 01/2026.  Let's finish our MACK projects this year!!!! LMFAO!!!!  Well, I still have (2) sleepers for sale. "NOT FREE" or "BASKET CASES". Both restorable and one already started and partially disassembled. One is a 60'' Able Body Co. sleeper for a MACK Superliner. Sleeper is a dual stack cut out. I started to restore this sleeper and began to disassemble and removed most of the damaged panels, insulation and dry rotted plywood floor and brown interior. Doors were also removed. I kept all of the parts I removed to use a templets. The frame structure is solid with NO rot or rust through. OEM HVAC unit included. Most of the hard work of stripping it down to bare bones is nearly done. Make me a serious offer.. 

I also have a 60'' Able Body Flat Roof from a Ford LTL9000 with gray interior in very nice condition. LMK with any questions. Post will stay up until one or both will sell. Also have them listed on Mack and Ford forums as well. Make a serious offer..

Buy one or both. I may make a package deal. I am located in Sweet Valley, PA. 18656. As everyone is well aware in this hobby, these sleepers are getting very difficult to find. Thanks!!!

Amos Cell: 570-822-9430

Pictures upon request or just come look at them and see. Check Facebook forums too!! Thanks!!

Did these sell??

Any chance the Mack museum might be interested in any of these?? Or does anyone have a personal line or a connection to someone in Allentown??

If you live in Pennsylvania. Vehicles possessing Antique registrations are also exempt from Federal Motor Carrier inspection regulations as well, absent equipment violation as they are different. They are no longer recognized by the courts, Et al., as "Commercial Motor Vehicles" and the driver no longer needs to possess a CDL either to operate it as the vehicle is de-registered to haul commodities or commerce. Hope this helps!!!! 

http://www.dot.state.pa.us/public/dvspubsforms/BMV/BMV Fact Sheets/fs-ant.pdf

Jeff or Alex, Can you guys email me the pics?

Looking for parts for our newest addition.. Send me a PM if you come across anything or know a guy, that knows a guy that seen a guy that may know someone that knows someone who knows where something is at... LOL. THANKS!! 

Looking to see if anyone may have an undamaged Mack WS/Cruiseliner glove box door for sale? I think they are all the same 1977-80's.. If so send me some info and pics please. thanks!!

 I have ruined many paint jobs too with the metal sparks etching itself in then rusting by not covering the cab...

Please send me a pic of this seat. I am interested. Thanks!!

Rob what would you charge for making a matching pair of these? Absent the steel brackets. I can fabricate the brackets myself. 

AWESOME!!! Great GoGo+ package.. Great pics too!!!  Well, I guess I have to start buying up as many 1/24 scale Western Star model kits as I can to build this now. LOL.. I need some advice on my project too if you don't mind me asking. I'll PM you if you have time. 

Hey Dan, What power combination did you install in the Western Duck?

That is great news Fuzzy!!! Hopefully they are affordable and versatile enough to be up fitted for all makes and models or with minor alterations. I will keep this in mind and forward. 

Nice project! Is this a factory A/C truck? If so can you send me some pics of the under dash a/c unit? Also, does your truck have aluminum front spring/bumper bracket braces? 

LOOKING GREAT Dan!!!! Are you powder coating the air cleaners and battery boxes? Love the blacked out Duck on the hood too. Are you doing the longer Grover air horns??

No problem Trent,  I am reproducing just about every decal for the truck inside and out made up. If your interested in a new air cleaner decal let me know. They were only a few bucks to have reproduced and look perfect. Mack/Volvo 🤢 no longer stocks or supplies them which I am sure your aware. 

This is what I have found for a part number on mine.

Did anyone else find this on Facebook?? or reach out to the guy??