Jump to content

Backstep801

Puppy Poster
  • Posts

    10
  • Joined

  • Last visited

Everything posted by Backstep801

  1. I am looking for a couple of parts books one for a 1993 rd688s and one for a 1995 dm690sx. does anyone know where I can find one my local dealer said they are only available for 2-3 yrs after production don't know if thats true or not. Can't see how it can be.
  2. Yes, then it would be the aftercooler. I got the part number but its almost 1200.00 so I am going to pull this on out and bring it to a local radiator shop and see what they can do. It may have to many leaks though for them to be able to fix it. If anyone knows of a cheaper one please let me know. The guy on ebay dosn't carry the right one and cant get it. Something about the ones with a warm air start are rare. and of course thats what I have.
  3. http://cgi.ebay.com/ebaymotors/New-Mack-CH...1QQcmdZViewItem Does anyone know the correct part number for a innercooler on a 1995 DM690sx E-7 300hp it has the cross over pipe for cold starting although I would just assume get rid of it. anyway I dont know the model number I need or if the one in the link above would fit. Thank you MACKTRUCKS4 for finding that.
  4. Well I pressure tested my intercooler on my 95 DM690sx its leaking in a few spots. I'm looking for a good used one or even new one. I called the local dealer and they want a grand for a new one. Not willing to spend that just yet. Does anyone know of a place to find one. I know there must be a wrecked truck burned up truck or something out there with a good cooler in it. I dont think a radiator repair shop will be able to fix mine.
  5. Well I pulled the top off the tranny and found the compound slider fork broken. Dug around with a magnet found the two pieces, rebuilt the air cylinder and put it back together with new fluid. seems to be working fine. Thanks for the help guys
  6. Yes it is, you from the area?
  7. Hello all, I am new to this site and would like to say hi to all. I have been around Macks for quite a while. I am 29 years old and a fireman with the City of Danbury. On my off days I work with my father who owns a demolition business. I have worked for him driving, repairing, wrecking and just general labor for about 15 years total now. We have a B-61, B-75, 69 R model tractor, 95 DM690SX rolloff, and a 93 R model tractor that we will be fixing up and putting on the road. The B-61 has been torn down and a restore started but not yet finished due to time. B-75 runs good but is waiting its turn to be restored and the 69 R model tractor was a tractor for many years before becoming a plow truck with a sander mounted to the frame. The years have taken its toll on her and she may have to be put down. The frame and cab are both in bad shape. The DM runs almost everyday hauling Demo and broken up concrete and scrap. She is a good runner has a E-7 300 and T2060 trans. The 93 R model I know has a e-7 350 motor and I think a 8 spd. We havn't cleaned it up and put it on the road yet hopefully we will get to it in the next couple weeks here. I will try and get some pictures of them up here. I am looking for a good place to get parts from and look up different parts. A website kinda like advance autos were you can put in the make and model and get back different parts and the purchase them. If anyone knows of one please let me know. I am on the go most of the day and don't have time to sit and call around looking for certain parts until I get home then most places are closed. Please advise if you have a good parts source. Well again Hello all and I hope to get to know everyone better.
  8. I have a 95 dm690sx my problem is the nose. like many trucks my lower front fenders have cracks in the fiberglass. I don't want to spend the money on a new nose as this will probably just happen again. Does anyone know of a front bra or stainless/chrome covers for this area. I would like to dress it up a bit without spending alot of money on a 450k mile truck that goes in and out of the scrap yard all the time. Also does anyone know of a good website I can find parts on. Thanks in advance
  9. I will try that. Thank you. Anybody know of a online place to search and get parts for trucks? I notice your from Appleton WI what a nice place. I was out there a little over a year ago at the Pierce factory.
  10. I have a t2060 in a 95 dm690 with a e7-300. My problem is when I use low 1st gear (it has a air splitter). If I use it the trans pulls a fit and pops out of any gear at any time while driving. I have to quickly push in the clutch and wait for the motor to unwind then release the clutch. this seems to happen at anytime. after a while if I don't use 1st low it wont pop out anymore. I have no experience with this trans. got the truck about a year ago abd this started probably 3 months ago. I havnt been using 1st low for a while but would have liked it a few times. please advise all help welcomed and thanked.
×
×
  • Create New...