-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
BMT Wiki
Collections
Store
Posts posted by Joe Schmitt
-
-
Name: Mack Superliner Rw613 (1989)
Date Added: 14 December 2008 - 01:43 PM
Owner: redrover
Short Description: None Provided
-
I have A Dynatard engine brake on my engine. Solinoids work fine and orings are good. Thanks for the reply
-
Thanks Skip I appreciate the confirmation on that . I did find a service manual so I should be ok now. It sure is nice to have a site to find good info . Thanks guys.
-
What about the bridge adjustment ? Do ya set em so you just start to fell it rise as on other engines?
-
I`m looking for the procedure for adjusting the valves on my E6-350 4v. It started missing ever so slightly at about the same time the engine brake started to get punky . I pulled off the valve covers and the brake solinoids are working. I think I found my trouble as most of the valve lash seem to be tight. I need to know which timming pointer to use : and if I can set 6 valve adjustments on TDC; Then roll the motor 1 turn and set the remaining 6 ? I`m used to working on IH farm tractors : sorry . I don`t know anyone with a manual for this engine. I know where I can get a manual for a E6 2V : are they set the same? Any help would be appreciated. I`m new to this site, but it seems like a great site with a great bunch of guys.
-
I`m also looking for injector opening pressures and leak down test procedure. Figured as long as I`m this far might as well check the injectors. Thanks !
Registry: 89 Superliner
in Truck Stories
Posted
Name: 89 Superliner
Date Added:
Owner: redrover
redrover